- 您现在的位置：买卖IC网 > PDF目录16115 > TS-MAC-SC-UT4 (Lattice Semiconductor Corporation)SITE LICENSE ETH MAC TRI SC/SCM PDF资料下载
参数资料
| 型号： | TS-MAC-SC-UT4 |
| 厂商： | Lattice Semiconductor Corporation |
| 文件页数： | 26/66页 |
| 文件大小： | 0K |
| 描述： | SITE LICENSE ETH MAC TRI SC/SCM |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | TSMACSCUT4 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页
Lattice Semiconductor
Register Descriptions
MODE (R/W)
Mnemonic: MODE
POR Value = 0000H
Functional Description
Name
Rsvd
Tx_en
Rx_en
FC_en
Gbit_en
Range
15:4
3
2
1
0
Description
Reserved .
Transmit Enable . When this bit is set, the Tx MAC is enabled to transmit frames. When
reset, the Tx MAC completes transmission of the packet currently being processed, then
stops.
Receive Enable . When this bit is set, the Rx MAC is enabled to receive frames. When
reset, the Rx MAC completes reception of the packet currently being processed, then
stops.
Flow-control Enable . When set, this bit enables the flow control functionality of the Tx
MAC. This bit should be set to enable the Tx MAC to transmit a PAUSE frame via the
tx_sndpausreq and tx_sndpaustim[15:0] MAC input ports.
Gigabit Enable . For the Classic Tri-speed MAC option, in order to operate in GbE mode,
this bit must be set high. For 10/100 mode, this bit must be set low.
For the SGMII Easy Connect MAC option, this bit does not control anything (note the MAC
operation speed is determined by the clock enables provided by the SGMII IP core). This
bit will echo back what is written to it.
For the Gigabit MAC option, this bit is a read-only bit and will always read back as logic
high. This bit does not control anything in the core.
Note, the state of this bit is useful for system use, since the cpu_if_gbit_en output signal,
from the core, always reflects the state of this register bit.
IPUG51_03.0, December 2010
26
Tri-Speed Ethernet MAC User’s Guide
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J0T-EZ-F4 | CONVERTER MOD DC/DC 6.5V 25W |
| M3CGK-2620K | IDC CABLE - MKC26K/MC26F/MCS26K |
| TS-MAC-PM-UT4 | SITE LICENSE ETH MAC TRI ECP2M |
| VI-J0T-EZ-F2 | CONVERTER MOD DC/DC 6.5V 25W |
| TS-MAC-P2-UT4 | SITE LICENSE ETH MAC TRI ECP2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TSMACX2U2 | 功能描述:以太网模块 TriSpd Ethernet MAC RoHS:否 制造商:Lantronix 产品:Device Servers 数据速率:300 bps to 921.6 kbps, 10 Mbps, 100 Mbps 接口类型:Ethernet, Serial 工作电源电压:5 V to 15 V 工作电源电流:133 mA to 400 mA 最大工作温度:+ 70 C |
| TS-MAC-X2-U3 | 功能描述:开发软件 Ethernet MAC TriSPD RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors |
| TS-MAC-X2-U4 | 功能描述:开发软件 ETHERNET MAC TRI-SPEED RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors |
| TS-MAC-X2-UT4 | 功能描述:开发软件 ETHERNET MAC TRI-SPEED RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors |
| TSMACXMU2 | 功能描述:以太网模块 TriSpd Ethernet MAC RoHS:否 制造商:Lantronix 产品:Device Servers 数据速率:300 bps to 921.6 kbps, 10 Mbps, 100 Mbps 接口类型:Ethernet, Serial 工作电源电压:5 V to 15 V 工作电源电流:133 mA to 400 mA 最大工作温度:+ 70 C |
发布紧急采购，3分钟左右您将得到回复。