参数资料
型号: W949D2CBJX6G
厂商: WINBOND ELECTRONICS CORP
元件分类: DRAM
英文描述: 16M X 32 DDR DRAM, 5 ns, PBGA90
封装: 8 X 13 MM, 0.80 MM PITCH, HALOGEN FREE AND LEAD FREE, VFBGA-90
文件页数: 38/60页
文件大小: 1160K
代理商: W949D2CBJX6G
W949D6CB / W949D2CB
512Mb Mobile LPDDR
Publication Release Date: Jun, 14, 2011
- 43 -
Revision A01-006
7.11.3 Self Refresh Entry and Exit
PRE
NOP
ARF
NOP
ARF
NOP
Pre All
High-z
CK
Command
A10(AP)
DQ
tRP
> t RFC
tRFC
=Don't Care
Address
NOP
tXSR
Any Command
(Auto Refresh
Recommene
d
)
Exit from
Self Refresh
Mode
Enter
Self Refresh
Mode
CKE
ACT
NOP
Ba, A
Row n
7.12 Power Down
Power-down is entered when CKE is registered Low (no accesses can be in progress). If power-down occurs when
all banks are idle, this mode is referred to as precharge power-down; if power-down occurs when there is a row
active in any bank, this mode is referred to as active power-down.
Entering power-down deactivates the input and output buffers, excluding CK, CK and CKE. In power-down mode,
CKE Low must be maintained, and all other input signals are “Dont Care”. The minimum power-down duration is
specified by tCKE. However, power-down duration is limited by the refresh requirements of the device.
The power-down state is synchronously exited when CKE is registered High (along with a NOP or DESELECT
command). A valid command may be applied tXP after exit from power-down.
For Clock Stop during Power-Down mode, please refer to the Clock Stop subsection in this specification.
7.12.1 Power-Down Entry and Exit
PRE
NOP
Valid
Pre All
High-z
CK
Command
A10 (AP)
DQ
tRP
tCKE
tXP
Address
NOP
Any Command
Exit from
Power Down
Entry
Valid
Precharge Power-Down mode shown; all banks are idle and tRP
is met when Power-down Entry command is issued
= Don't Care
CKE
相关PDF资料
PDF描述
W963B6BBN80E 512K X 16 PSEUDO STATIC RAM, 75 ns, PBGA48
W964A6BBN70E 1M X 16 PSEUDO STATIC RAM, 65 ns, PBGA48
W964L6ABN70E 1M X 16 PSEUDO STATIC RAM, 65 ns, PBGA48
W964L6ABN70I 1M X 16 PSEUDO STATIC RAM, 65 ns, PBGA48
W971GG6JB-25A 64M X 16 DDR DRAM, 0.4 ns, PBGA84
相关代理商/技术参数
参数描述
W949D2KBJX5E 制造商:Winbond Electronics Corp 功能描述:512M MDDR, X32, 200MHZ 制造商:Winbond Electronics Corp 功能描述:IC MEMORY
W949D2KBJX5I 制造商:Winbond Electronics Corp 功能描述:IC MEMORY
W949D2KBJX6E 制造商:Winbond Electronics Corp 功能描述:512M MDDR, X32, 166MHZ 制造商:Winbond Electronics Corp 功能描述:IC MEMORY
W949D6CB 制造商:WINBOND 制造商全称:Winbond 功能描述:512Mb Mobile LPDDR
W949D6CBHX5E 功能描述:IC LPDDR SDRAM 512MBIT 60VFBGA RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1 系列:- 格式 - 存储器:闪存 存储器类型:闪存 - NAND 存储容量:4G(256M x 16) 速度:- 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP(0.724",18.40mm 宽) 供应商设备封装:48-TSOP I 包装:Digi-Reel® 其它名称:557-1461-6