参数资料
型号: M38D59GC-XXXFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 6.25 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件页数: 29/142页
文件大小: 2004K
代理商: M38D59GC-XXXFP
Rev.3.04
May 20, 2008
Page 124 of 134
REJ03B0158-0304
38D5 Group
3. Direction Registers
4. Pull-Up Control
Only for the pin set to input mode, pull-up is controlled by the
PULL register and the segment output disable register.
Notes on Termination of Unused Pins
1. Termination of Unused Pins
Perform the following at the shortest possible distance (20 mm or
less) from the MCU pins.
(1)
I/O ports
Set the ports to input mode and connect each pin to VCC or VSS
through a resistor of 1 k to 10 k
. An internal pull-up resistor can
also be used for the port where the internal pull-up resister is
selectable.
To set the ports to output mode, leave open at “L” or “H” output.
When setting the ports to output mode and leave open,
input mode in the initial state remains until the mode of the
ports are switched to output mode by a program after a
reset. This may cause the voltage level of the pins to be
undefined and the power source current to increase while
the ports remains in input mode. For any effects on the
system, careful system evaluations should be implemented
on the user side.
The direction registers may be changed due to a program
runaway or noise, so reset the registers periodically by a
program to increase the program reliability.
2. Termination Concerns
(1) When setting I/O ports to input mode
[1] Do not leave open
<Reason>
The power source current may increase depending on the
first-stage circuit.
The ports are more likely affected by noise when compared
with the termination shown on the above “1. (1) I/O ports”
[2] Do not connect to VCC or VSS directly
<Reason>
If the direction registers are changed to output mode due to a
program runaway or noise, a short circuit may occur.
[3] Do not connect multiple ports in a lump to VCC or VSS
through a resistor.
<Reason>
If the direction registers are changed to output mode due to a
program runaway or noise, a short circuit may occur between the
ports.
相关PDF资料
PDF描述
MC68B05P2L 8-BIT, MROM, 2 MHz, MICROCONTROLLER, CDIP28
MC908QB4MDT 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MC908QY2AVDWE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MK2745-20SLF 108 MHz, VIDEO CLOCK GENERATOR, PDSO16
MK2742-04SLFTR 81 MHz, VIDEO CLOCK GENERATOR, PDSO16
相关代理商/技术参数
参数描述
M38D59GFFP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M38D59GFHP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M38D59T-RLFS 功能描述:BOARD EMULATOR FOR 38D5 GROUP RoHS:否 类别:编程器,开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
M38DC-15 制造商:M/A-COM Technology Solutions 功能描述:MIXER(SPEC UX1015) - Bulk
M38K00F1-16FP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER