参数资料
型号: M38D59GC-XXXFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 6.25 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件页数: 82/142页
文件大小: 2004K
代理商: M38D59GC-XXXFP
Rev.3.04
May 20, 2008
Page 44 of 134
REJ03B0158-0304
38D5 Group
SERIAL INTERFACE
SERIAL I/O1
Serial I/O1 can be used as either clock synchronous or
asynchronous (UART) serial I/O. A dedicated timer is also
provided for baud rate generation.
(1) Clock Synchronous Serial I/O Mode
Clock synchronous serial I/O1 mode can be selected by setting
the serial I/O mode selection bit of the serial I/O1 control register
to “1”.
For clock synchronous serial I/O1, the transmitter and the
receiver must use the same clock. If an internal clock is used,
transfer is started by a write signal to the TB/RB.
Fig. 33 Block diagram of clock synchronous serial I/O1
Fig. 34 Operation of clock synchronous serial I/O1 function
1/4
F/F
Receive buffer register
Receive shift register
Receive buffer full flag (RBF)
Receive interrupt request (RI)
Clock control circuit
Shift clock
Serial I/O1 synchronous
clock selection bit
Baud rate generator
Frequency division ratio 1/(n+1)
BRG count source selection bit
Clock control circuit
Falling-edge detector
Transmit buffer register
Data bus
Shift clock
Transmit shift completion flag (TSC)
Transmit buffer empty flag (TBE)
Transmit interrupt request (TI)
Transmit interrupt source selection bit
Data bus
Transmit shift register
Serial I/O1 control register
Serial I/O1 status register
Address 001816
Address 001916
Address 001C16
Address 001A16
P40/RXD
P42/SCLK1
P43/SRDY1
P41/TXD
φSOURCE
Note1:
φSOURCE indicates the followings:
XIN input in the frequency/2, 4, or 8 mode
On-chip oscillator divided by 4 in the on-chip oscillator mode
Sub-clock in the low-speed mode
(1)
D7
D0
D1
D2
D3
D4
D5
D6
D0
D1
D2
D3
D4
D5
D6
RBF = 1
TSC = 1
TBE = 0
TBE = 1
TSC = 0
Transfer shift clock
(1/2 to 1/2048 of the internal
clock, or an external clock)
Serial output TxD
Serial input RxD
Write pulse to receive/transmit
buffer register
Overrun error (OE)
detection
Notes 1: As the transmit interrupt (TI) source, which can be selected, either when the transmit buffer has emptied (TBE = 1) or
after the transmit shift operation has ended (TSC = 1), by setting the transmit interrupt source selection bit (TIC) of the
serial I/O1 control register.
2: If data is written to the transmit buffer register when TSC=0, the transmit clock is generated continuously and serial data
is output continuously from the TxD pin.
3: The receive interrupt (RI) is set when the receive buffer full flag (RBF) becomes “1” .
Receive enable signal SRDY
D7
相关PDF资料
PDF描述
MC68B05P2L 8-BIT, MROM, 2 MHz, MICROCONTROLLER, CDIP28
MC908QB4MDT 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MC908QY2AVDWE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MK2745-20SLF 108 MHz, VIDEO CLOCK GENERATOR, PDSO16
MK2742-04SLFTR 81 MHz, VIDEO CLOCK GENERATOR, PDSO16
相关代理商/技术参数
参数描述
M38D59GFFP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M38D59GFHP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M38D59T-RLFS 功能描述:BOARD EMULATOR FOR 38D5 GROUP RoHS:否 类别:编程器,开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
M38DC-15 制造商:M/A-COM Technology Solutions 功能描述:MIXER(SPEC UX1015) - Bulk
M38K00F1-16FP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER