参数资料
型号: MT46V64M4
厂商: Micron Technology, Inc.
英文描述: 16 Meg x 4 x 4 banks DDR SDRAM(16M x 4 x 4组,双数据速率同步动态RAM)
中文描述: 16梅格× 4 × 4银行DDR SDRAM内存(1,600 × 4 × 4组,双数据速率同步动态RAM)的
文件页数: 22/69页
文件大小: 2410K
代理商: MT46V64M4
22
256Mb: x4, x8, x16 DDR SDRAM
256Mx4x8x16DDR_B.p65
Rev. B; Pub. 7/00
Micron Technology, Inc., reserves the right to change products or specifications without notice.
2000, Micron Technology, Inc.
256Mb: x4, x8, x16
DDR SDRAM
ADVANCE
Data from any READ burst may be truncated with a
BURST TERMINATE command, as shown in Figure 11.
The BURST TERMINATE latency is equal to the READ
(CAS) latency, i.e., the BURST TERMINATE command
should be issued
x
cycles after the READ command,
where
x
equals the number of desired data element pairs
(pairs are required by the 2
n
-prefetch architecture).
Data from any READ burst must be completed or
truncated before a subsequent WRITE command can be
issued. If truncation is necessary, the BURST TERMI-
NATE command must be used, as shown in Figure 12.
The
t
DQSS (MIN) case is shown; the
t
DQSS (MAX) case
has a longer bus idle time. (
t
DQSS [MIN] and
t
DQSS
[MAX] are defined in the section on WRITEs.)
A READ burst may be followed by, or truncated with,
a PRECHARGE command to the same bank provided
that auto precharge was not activated. The PRECHARGE
command should be issued
x
cycles after the READ
command, where
x
equals the number of desired data
element pairs (pairs are required by the 2
n
-prefetch
architecture). This is shown in Figure 13. Following the
PRECHARGE command, a subsequent command to the
same bank cannot be issued until
t
RP is met. Note that
part of the row precharge time is hidden during the
access of the last data elements.
READs (continued)
相关PDF资料
PDF描述
MT46V64M8 16 Meg x 8 x 4 banks DDR SDRAM(16M x 8 x 4组,双数据速率同步动态RAM)
MT48LC16M8A1TG SYNCHRONOUS DRAM
MT48LC32M4A1 ECONOLINE: RSZ/P - 1kVDC
MT48LC32M4A2 SYNCHRONOUS DRAM
MT48LC32M4A1TG SYNCHRONOUS DRAM
相关代理商/技术参数
参数描述
MT46V64M4_1 制造商:MICRON 制造商全称:Micron Technology 功能描述:Double Data Rate (DDR) SDRAM