参数资料
型号: SFCF8192H4BK4SA-I-QT-553-SMA
厂商: Swissbit NA Inc
文件页数: 39/99页
文件大小: 0K
描述: FLASH SLC UDMA/MDMA/PIO 8G
视频文件: Swissbit Manufacturing Overview
RoHS指令信息: Environment Protection Declaration
标准包装: 20
系列: C-300
存储容量: 8GB
存储器类型: CompactFlash?
其它名称: 1052-1012
e) The host shall negate – CS0, -CS1, DA2, DA1, and DA0. The host shall keep – CS0, -CS1, DA2, DA1, and DA0
negated until after negating – DMACK at the end of the burst.
f)
Steps I, (d), and (e) shall have occurred at least t ACK before the host asserts – DMACK. The host shall keep –
DMACK asserted until the end of an Ultra DMA burst.
g) The device may negate – DDMARDY t ZIORDY after the host has asserted – DMACK. Once the device has negated
– DDMARDY, the device shall not release – DDMARDY until after the host has negated DMACK at the end of
an Ultra DMA burst.
h) The host shall negate STOP within t ENV after asserting – DMACK. The host shall not assert STOP until after the
first negation of HSTROBE.
i)
j)
The device shall assert – DDMARDY within t LI after the host has negated STOP. After asserting DMARQ and –
DDMARDY the device shall not negate either signal until after the first negation of HSTROBE by the host.
The host shall drive the first word of the data transfer onto D[15:00]. This step may occur any time during
Ultra DMA burst initiation.
k) To transfer the first word of data: the host shall negate HSTROBE no sooner than t UI after the device has
asserted – DDMARDY. The host shall negate HSTROBE no sooner than t DVS after the driving the first word of
data onto D[15:00].
Figure 15: Ultra DMA Data-Out Burst Initiation Timing
Note: The definitions for the STOP, DDMARDY, and HSTROBE signal lines are not in effect until DMARQ
and DMACK are asserted.
6.5.4.4.7 Sustaining an Ultra DMA Data-Out Burst
An Ultra DMA Data-Out burst is sustained by following the steps lettered below. The timing diagram is shown in
Figure 16: Sustained Ultra DMA Data-Out Burst Timing. The associated timing parameters are specified in Table 26:
The following steps shall occur in the order they are listed unless otherwise specifically allowed:
a) The host shall drive a data word onto D[15:00].
Swissbit AG
Industriestrasse 4
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.51
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
C-300_data_sheet_CF-HxBK_Rev151.doc
Page 39 of 99
相关PDF资料
PDF描述
TSL245R-LF IC LIGHT TO FREQUENCY CONV 3PIN
TSL235R-LF IC LIGHT TO FREQUENCY CONV 3PIN
SFCF4096H1BO2TO-I-D1-523-SMA FLASH SLC UDMA/MDMA/PIO 4G
MLBAWT-A1-0000-0000DZ LED XLAMP ML-B WHITE SMD
MLBAWT-A1-0000-0000DV LED XLAMP ML-B WHITE SMD
相关代理商/技术参数
参数描述
SFC-FUSE-CAB 功能描述:熔丝座配件 SFC-FUSE-CAB RoHS:否 制造商:Schurter 产品:Caps 类型:Slot Knob 用于:FEU, FEU (Med), FAU, FAC
SFC-HC 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Handy Controller For SF4C Series Only 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:HANDY CONTROLLER FOR SF4C
SFCIC5000102MX1 功能描述:电磁干扰直通滤波器 500V .001uF X7R 20% C Filter RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000103MX1 功能描述:电磁干扰直通滤波器 500V .01uF X7R C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000220ZC1 功能描述:电磁干扰直通滤波器 500V 22pF C0G C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A