参数资料
型号: SFCF8192H4BK4SA-I-QT-553-SMA
厂商: Swissbit NA Inc
文件页数: 60/99页
文件大小: 0K
描述: FLASH SLC UDMA/MDMA/PIO 8G
视频文件: Swissbit Manufacturing Overview
RoHS指令信息: Environment Protection Declaration
标准包装: 20
系列: C-300
存储容量: 8GB
存储器类型: CompactFlash?
其它名称: 1052-1012
10.1 Check Power Mode (98h or E5h)
This command checks the power mode.
Issuing the command while the Card is in Standby mode, is about to enter Standby, or is exiting Standby, the
command will set BSY, set the Sector Count Register to 00h, clear BSY and generate an interrupt.
Issuing the command when the Card is in Idle mode will set BSY, set the Sector Count Register to FFh, clear BSY
and generate an interrupt.
Table 56 defines the Byte sequence of the Check Power Mode command.
Table 56: Check Power Mode
Task File Register
7
6
5
4
3
2
1
0
COMMAND
98h or E5h
DRIVE/HEAD
nu
nu
nu
D
nu
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
nu
nu
nu
nu
nu
10.2 Erase Sector(s) (C0h)
This command is used to pre-erase and condition data sectors prior to a Write Sector without Erase command or a
Write Multiple Without Erase command. There is no data transfer associated with this command but a Write Fault
error status can occur. Table 57 defines the Byte sequence of the Erase Sector command.
Table 57: Erase Sector(s)
Task File Register
7
6
5
4
3
2
1
0
COMMAND
C0h
DRIVE/HEAD
nu
L
nu
D
H[3:0] or LBA[27:24] of the starting
sector/LBA
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
Cylinder[15:8] or LBA[23:16] of the first sector/LBA to erase
Cylinder[7:0] or LBA[15:8] of the first sector/LBA to erase
Sector[7:0] or LBA[7:0] of the first sector/LBA to erase
The number of sectors/logical blocks to erase
nu
10.3 Execute Drive Diagnostic (90h)
This command performs the internal diagnostic tests implemented by the Card.
In PCMCIA configuration, this command only runs on the Card which is addressed by the Drive/Head register when
the command is issued. This is because PCMCIA Card interface does not allow for direct inter-drive
communication.
In True IDE Mode, the Drive bit is ignored and the diagnostic command is executed by both the Master and the
Slave with the Master responding with the status for both devices.
Table 58 defines the Execute Drive Diagnostic command Byte sequence. The Diagnostic codes shown in
Swissbit AG
Industriestrasse 4
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.51
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
C-300_data_sheet_CF-HxBK_Rev151.doc
Page 60 of 99
相关PDF资料
PDF描述
TSL245R-LF IC LIGHT TO FREQUENCY CONV 3PIN
TSL235R-LF IC LIGHT TO FREQUENCY CONV 3PIN
SFCF4096H1BO2TO-I-D1-523-SMA FLASH SLC UDMA/MDMA/PIO 4G
MLBAWT-A1-0000-0000DZ LED XLAMP ML-B WHITE SMD
MLBAWT-A1-0000-0000DV LED XLAMP ML-B WHITE SMD
相关代理商/技术参数
参数描述
SFC-FUSE-CAB 功能描述:熔丝座配件 SFC-FUSE-CAB RoHS:否 制造商:Schurter 产品:Caps 类型:Slot Knob 用于:FEU, FEU (Med), FAU, FAC
SFC-HC 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Handy Controller For SF4C Series Only 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:HANDY CONTROLLER FOR SF4C
SFCIC5000102MX1 功能描述:电磁干扰直通滤波器 500V .001uF X7R 20% C Filter RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000103MX1 功能描述:电磁干扰直通滤波器 500V .01uF X7R C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000220ZC1 功能描述:电磁干扰直通滤波器 500V 22pF C0G C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A