参数资料
型号: SFCF8192H4BK4SA-I-QT-553-SMA
厂商: Swissbit NA Inc
文件页数: 43/99页
文件大小: 0K
描述: FLASH SLC UDMA/MDMA/PIO 8G
视频文件: Swissbit Manufacturing Overview
RoHS指令信息: Environment Protection Declaration
标准包装: 20
系列: C-300
存储容量: 8GB
存储器类型: CompactFlash?
其它名称: 1052-1012
h) The device shall latch the host’s CRC data from D[15:00] on the negating edge of – DMACK.
i)
The device shall compare the CRC data received from the host with the results of its own CRC calculation. If
a miscompare error occurs during one or more Ultra DMA bursts for any one command, at the end of the
command, the device shall report the first error that occurred (see 6.5.4.5 ).
j) The device shall release – DDMARDY within t IORDYZ after the host has negated – DMACK.
k) The host shall neither negate STOP nor negate HSTROBE until at least t ACK after negating – DMACK.
l) The host shall not assert – IOWR, -CS0, -CS1, DA2, DA1, or DA0 until at least tACK after negating
-DMACK.
Figure 19: Ultra DMA Data-Out Burst Host Termination Timing
Notes: The definitions for the STOP, DDMARDY, and HSTROBE signal lines are no longer in effect after
DMARQ and DMACK are negated.
6.5.4.5 Ultra DMA CRC Calculation
The following is a list of rules for calculating CRC, determining if a CRC error has occurred during an Ultra DMA
burst, and reporting any error that occurs at the end of a command.
1.
2.
Both the host and the device shall have a 16-bit CRC calculation function.
Both the host and the device shall calculate a CRC value for each Ultra DMA burst.
3. The CRC function in the host and the device shall be initialized with a seed of 4ABAh at the beginning of
an Ultra DMA burst before any data is transferred.
4. For each STROBE transition used for data transfer, both the host and the device shall calculate a new CRC
value by applying the CRC polynomial to the current value of their individual CRC functions and the word
being transferred. CRC is not calculated for the return of STROBE to the asserted state after the Ultra DMA
burst termination request has been acknowledged.
5. At the end of any Ultra DMA burst the host shall send the results of its CRC calculation function to the
device on D[15:00] with the negation of – DMACK.
Swissbit AG
Industriestrasse 4
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.51
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
C-300_data_sheet_CF-HxBK_Rev151.doc
Page 43 of 99
相关PDF资料
PDF描述
TSL245R-LF IC LIGHT TO FREQUENCY CONV 3PIN
TSL235R-LF IC LIGHT TO FREQUENCY CONV 3PIN
SFCF4096H1BO2TO-I-D1-523-SMA FLASH SLC UDMA/MDMA/PIO 4G
MLBAWT-A1-0000-0000DZ LED XLAMP ML-B WHITE SMD
MLBAWT-A1-0000-0000DV LED XLAMP ML-B WHITE SMD
相关代理商/技术参数
参数描述
SFC-FUSE-CAB 功能描述:熔丝座配件 SFC-FUSE-CAB RoHS:否 制造商:Schurter 产品:Caps 类型:Slot Knob 用于:FEU, FEU (Med), FAU, FAC
SFC-HC 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Handy Controller For SF4C Series Only 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:HANDY CONTROLLER FOR SF4C
SFCIC5000102MX1 功能描述:电磁干扰直通滤波器 500V .001uF X7R 20% C Filter RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000103MX1 功能描述:电磁干扰直通滤波器 500V .01uF X7R C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A
SFCIC5000220ZC1 功能描述:电磁干扰直通滤波器 500V 22pF C0G C FILTER W/NUTS RoHS:否 制造商:Tusonix 电容:0.027 uF 电压额定值:50 V 电路类型: 最大直流电流: 最大直流电阻: 工作温度范围:- 55 C to + 125 C 系列:4403 螺纹大小:4-40 UNC-2A