参数资料
| 型号： | XRT91L80IB |
| 厂商： | Exar Corporation |
| 文件页数： | 27/46页 |
| 文件大小： | 0K |
| 描述： | IC TXRX SONET/SDH 4BIT 196STBGA |
| 产品变化通告： | XRT91L80IB Obsolescence 6/Sept/2010 |
| 标准包装： | 126 |
| 类型： | 收发器 |
| 规程： | SONET/SDH |
| 电源电压： | 3.3V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 196-LFBGA |
| 供应商设备封装： | 196-STBGA（12x12） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页当前第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页
XRT91L80
xr
2.488/2.666 GBPS STS-48/STM-16 SONET/SDH TRANSCEIVER
REV. 1.0.0
30
5.2
16-BIT SERIAL DATA INPUT DESCRITPTION
The serial data input is sampled on the rising edge of SCLK. In readback mode, the serial data output is
updated on the falling edge of SCLK. The serial data must be applied to the transceiver LSB first. The 16 bits
of serial data are described below.
5.2.1
R/W (SCLK1)
The first serial bit applied to the transceiver informs the microprocessor that a Read or Write operation is
desired. If the R/W bit is set to “0”, the microprocessor is configured for a Write operation. If the R/W bit is set
to “1”, the microprocessor is configured for a Read operation.
5.2.2
A[5:0] (SCLK2 - SCLK7)
The next 6 SCLK cycles are used to provide the address to which a Read or Write operation will occur. A0
(LSB) must be sent to the transceiver first followed by A1 and so forth until all 6 address bits have been
sampled by SCLK.
5.2.3
X (Dummy Bit SCLK8)
The dummy bit sampled by SCLK8 is used to allow sufficient time for the serial data output pin to update data
if the readback mode is selected by setting R/W = “1”. Therefore, the state of this bit is ignored and can hold
either “0” or “1” during both Read and Write operations.
5.2.4
D[7:0] (SCLK9 - SCLK16)
The next 8 SCLK cycles are used to provide the data to be written into the internal register chosen by the ad-
dress bits. D0 (LSB) must be sent to the transceiver first followed by D1 and so forth until all 8 data bits have
been sampled by SCLK. Once 16 SCLK cycles have been complete, the transceiver holds the data until CS is
pulled “High” whereby, the serial microprocessor latches the data into the selected internal register.
5.3
8-BIT SERIAL DATA OUTPUT DESCRIPTION
The serial data output is updated on the falling edge of SCLK9 - SCLK16 if R/W is set to “1”. D0 (LSB) is pro-
vided on SCLK9 to the SDO pin first followed by D1 and so forth until all 8 data bits have been updated. The
SDO pin allows the user to read the contents stored in individual registers by providing the desired address on
the SDI pin during the Read cycle.
相关PDF资料 |
PDF描述 |
|---|---|
| V24B48M150BG2 | CONVERTER MOD DC/DC 48V 150W |
| VI-J52-MX-F1 | CONVERTER MOD DC/DC 15V 75W |
| V24B48M150BF2 | CONVERTER MOD DC/DC 48V 150W |
| VI-J51-MX-F4 | CONVERTER MOD DC/DC 12V 75W |
| V24B36M150BL | CONVERTER MOD DC/DC 36V 150W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XRT91L80IB-F | 功能描述:总线收发器 Transceiver RoHS:否 制造商:Fairchild Semiconductor 逻辑类型:CMOS 逻辑系列:74VCX 每芯片的通道数量:16 输入电平:CMOS 输出电平:CMOS 输出类型:3-State 高电平输出电流:- 24 mA 低电平输出电流:24 mA 传播延迟时间:6.2 ns 电源电压-最大:2.7 V, 3.6 V 电源电压-最小:1.65 V, 2.3 V 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-48 封装:Reel |
| XRT91L81 | 制造商:EXAR 制造商全称:EXAR 功能描述:2.488/2.666GBPS OC-48/STM-16 SONET/SDH TRANSCEIVER |
| XRT91L81IB | 制造商:EXAR 制造商全称:EXAR 功能描述:2.488/2.666GBPS OC-48/STM-16 SONET/SDH TRANSCEIVER |
| XRT91L82 | 制造商:EXAR 制造商全称:EXAR 功能描述:2.488/2.666 GBPS STS-48/STM-16 SONET/SDH TRANSCEIVER |
| XRT91L82ES | 功能描述:总线收发器 Transceiver RoHS:否 制造商:Fairchild Semiconductor 逻辑类型:CMOS 逻辑系列:74VCX 每芯片的通道数量:16 输入电平:CMOS 输出电平:CMOS 输出类型:3-State 高电平输出电流:- 24 mA 低电平输出电流:24 mA 传播延迟时间:6.2 ns 电源电压-最大:2.7 V, 3.6 V 电源电压-最小:1.65 V, 2.3 V 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-48 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。