参数资料
型号: DS2196LN+
厂商: Maxim Integrated Products
文件页数: 1/157页
文件大小: 0K
描述: IC FRAMER DUAL T1 LIU 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 90
控制器类型: T1 调帧器
接口: 并行/串行
电源电压: 3.135 V ~ 3.465 V
电流 - 电源: 85mA
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
1 of 157
093002
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
GENERAL DESCRIPTION
The DS2196 T1 dual framer LIU is designed for T1
transmission equipment. The DS2196 combines dual
optimized framers together with a LIU. This
combination allows the users to extract and insert
facility data-link (FDL) messages in the receive and
transmit paths, collect line performance data, and
perform basic channel conditioning and maintenance.
The DS2196 contains all of the necessary functions
for connection to T1 lines whether they are DS1 long
haul or DSX–1 short haul. The clock recovery
circuitry automatically adjusts to T1 lines from 0ft to
over 6000ft in length. The device can generate both
DSX–1 line buildouts as well as CSU line buildouts
of -7.5dB, -15dB, and -22.5dB. The on-board jitter
attenuator (selectable to either 32 bits or 128 bits) can
be placed in either the transmit or receive data paths.
The framer locates the frame and multiframe
boundaries and monitors the data stream for alarms.
The device contains a set of internal registers that the
user can access and use to control the unit’s operation
of the unit. Quick access through the parallel control
port allows a single controller to handle many T1
lines. The device fully meets all of the latest T1
specifications.
PACKAGE OUTLINE
FEATURES
§ Two full-featured framers and a short/long-haul
line interface unit (LIU) in one small package
§ Based on Dallas Semiconductor’s single -chip
transceiver (SCT) family
§ Two HDLC controllers with 64-byte buffers that
can be used for the FDL or DS0 channels
§ Supports NPRMs and SPRMs as per ANSI
T1.403-1998
§ Can be combined with a short/long-haul LIU or a
HDSL modem chipset to create a low-cost office
repeater/NIU/CSU, or a HDSL1/HDSL2 terminal
unit with enhanced monitoring and data link
control
§ Supports fractional T1
§ Can convert from D4 to ESF framing and ESF to
D4 framing
§ 32-bit or 128-bit crystal-less jitter attenuator
§ Can generate and detect repeating in-band
patterns from 1 to 8 bits or 16 bits in length
§ Detects and generates RAI-CI and AIS-CI
§ Generates DS1 idle codes
§ On-chip programmable BERT generator and
detector
§ All key signals are routed to pins to support
numerous hardware configurations
§ Supports both NRZ and bipolar interfaces
§ Can create errors in the F-bit position and BERT
interface data paths
§ 8-bit parallel control port that can be used
directly on either multiplexed or nonmultiplexed
buses (Intel or Motorola)
§ IEEE 1149.1 JTAG Boundary Scan
§ 3.3V supply with 5V tolerant inputs and outputs
§ 100-pin LQFP (14 mm x 14 mm) package
ORDERING INFORMATION
PART
TEMP RANGE
PIN-PACKAGE
DS2196L
0C to +70C
100 LQFP
DS2196LN
-40C to +85C
100 LQFP
www.maxim-ic.com
DS2196
T1 Dual Framer LIU
1
100
DS2196
相关PDF资料
PDF描述
DS21FF42 IC FRAMER T1 4X4 16CH 300-BGA
DS21FF44 IC FRAMER E1 4X4 16CH 300-BGA
DS21FT44N+ IC FRAMER 4X4 16CH 300-BGA
DS21Q352B IC TXRX QUAD T1/E1 3.3V 256-BGA
DS21Q41BT IC FRAMER T1 QUAD 128-TQFP
相关代理商/技术参数
参数描述
DS2196LN+ 功能描述:网络控制器与处理器 IC T1 Dual Framer LIU RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS219T 功能描述:烙铁 DESOLDERING HEAD RoHS:否 制造商:Weller 产品:Soldering Stations 类型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大温度:+ 850 F 电缆类型:US Cord Included
DS21E352 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21E352N 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21E354 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray