参数资料
型号: IPR-SDRAM/DDR
厂商: Altera
文件页数: 75/106页
文件大小: 0K
描述: IP DDR SDRAM CONTROLLER RENEW
标准包装: 1
系列: *
类型: MegaCore
功能: DDR SDRAM 控制器
许可证: 续用许可证
Chapter 3: Functional Description
Parameters
Table 3–19. Device Datasheet Settings (Part 2 of 2)
3–39
Parameter
t DQSS
t DQSS
Units
cycle
cycle
Description
The minimum write command to first DQS latching transition.
The maximum write command to first DQS latching transition.
Board Timings
Table 3–20 shows the pin loading parameters.
Table 3–20. Pin Loading
Parameter
Manual pin load control
Pin loading on FPGA DQ/DQS pins
Pin loading on FPGA
address/command pins
Pin loading on FPGA clock pins
Units
On or off
pF
pF
pF
Description
Turn on or turn off the manual pin load control.
The default capacitive loading on the FPGA DQ/DQS pins is based
on the chosen memory type. You should update this figure if it does
not match your board and memory devices.
The default capacitive loading on the FPGA address/command pins
is based on the chosen memory type. You should update this figure
if it does not match your board and memory devices.
The default capacitive loading on the FPGA clock pins is based on
the chosen memory type. You should update this figure if it does
not match your board and memory devices.
Table 3–21 shows the board trace delay parameters. IP Toolbench uses these values to
perform timing analysis.
Table 3–21. Board Trace Delays
Parameter
FPGA clock output to memory chip clock
input, nominal delay
Memory DQ/DQS outputs to FPGA inputs,
nominal delay
Fed-back clock trace, nominal delay
Tolerance on nominal board delays ±
Worst trace skew between DQS/DQ/DM in
any one data group
Units
ps
ps
ps
%
ps
Description
The nominal or average value of the delay attributable to the board
traces from the FPGA clock output pin to the memory device clock
input pin.
The nominal or average value of the delay attributable to the board
traces from the memory device DQS and DQ clock output pins to the
FPGA input pins in read mode.
The nominal or average value of the delay attributable to the board
traces from the FPGA clock output pin to the fed-back clock input
pin. This delay should match the sum of the clock and DQ/DQS trace
lengths.
The tolerance on the nominal board trace delays. This tolerance
should take into account any variability between individual boards,
due to temperature or voltage, and different trace lengths to different
memory devices in your system.
The worst case skew with respect to DQS and any other DQ or DM
signal in any one byte group between any one memory device and
the FPGA.
? March 2009
Altera Corporation
相关PDF资料
PDF描述
GEC49DRYH CONN EDGECARD 98POS DIP .100 SLD
GCC25DRXS CONN EDGECARD 50POS DIP .100 SLD
IPR-RSENC IP REED-SOLOMON ENCODER RENEW
EBC43DRTS CONN EDGECARD 86POS DIP .100 SLD
ECC36DCAI CONN EDGECARD 72POS R/A .100 SLD
相关代理商/技术参数
参数描述
IP-RSENC 功能描述:开发软件 Reed-Solomon Encoder MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SLITE2 功能描述:开发软件 SerialLite II MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SRAM/QDRII 功能描述:开发软件 QDRII SRAM Control MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SSIP 功能描述:开发软件 Crypto Bundle BU Solution RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-TRIETHERNET 功能描述:开发软件 Triple Speed Ethernt MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors