参数资料
型号: IPR-SDRAM/DDR
厂商: Altera
文件页数: 81/106页
文件大小: 0K
描述: IP DDR SDRAM CONTROLLER RENEW
标准包装: 1
系列: *
类型: MegaCore
功能: DDR SDRAM 控制器
许可证: 续用许可证
A–3
Parameters
Table A–2. Postamble Options (Part 2 of 2)
Parameter
Postamble clock setting
Dedicated clock phase
Number of DQS delay
matching buffers
Range
0 ( clk , rising edge),
90 ( write_clk , falling
edge),
180 ( clk , falling edge)
270 ( write_clk , rising
edge), or
dedicated
0 to 359
0 to 8
Description
Selects which clock to use for the postamble logic: the
system clock, the write clock (a 90 ° advanced version of the
system clock), or a dedicated postamble clock. Also defines
which edge of the chosen clock to use for the postamble
logic. If you select falling edge, the data path automatically
inserts inverters on the clock inputs to the postamble control
registers.
Allows you to enter the phase of the dedicated postamble
clock that is used for timing analysis. IP Toolbench uses this
value to set up the PLL phase shift.
Inserts the chosen number of delay buffers on the undelayed
DQS in Stratix devices. Insert delay buffers when you are
using low frequencies, to ensure that the capture registers
are not disabled too early.
Table A–3 shows the capture options (non-DQS mode only).
Table A–3. Capture Options
Parameter
Manual capture control
Capture setting
Dedicated clock phase
Range
On or off
0 ( clk , rising edge),
90 ( write_clk , falling
edge),
180 ( clk , falling edge)
270 ( write_clk , rising
edge), or
dedicated
0 to 359
Description
Turn on to specify the details of the clock used for the
capture logic. Otherwise, the details are calculated
automatically based on system timing, “DQS Postamble” on
Selects which clock to use for the capture logic: the system
clock, the write clock (a 90 ° advanced version of the system
clock), or a dedicated capture clock. Also defines which edge
of the chosen clock to use for the capture logic. If you select
falling edge, the data path automatically inserts inverters on
the clock inputs to the capture registers.
Allows you to enter the phase of the dedicated capture clock
that is used for timing analysis. IP Toolbench uses this value
to set up the PLL phase shift.
? March 2009
Altera Corporation
相关PDF资料
PDF描述
GEC49DRYH CONN EDGECARD 98POS DIP .100 SLD
GCC25DRXS CONN EDGECARD 50POS DIP .100 SLD
IPR-RSENC IP REED-SOLOMON ENCODER RENEW
EBC43DRTS CONN EDGECARD 86POS DIP .100 SLD
ECC36DCAI CONN EDGECARD 72POS R/A .100 SLD
相关代理商/技术参数
参数描述
IP-RSENC 功能描述:开发软件 Reed-Solomon Encoder MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SLITE2 功能描述:开发软件 SerialLite II MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SRAM/QDRII 功能描述:开发软件 QDRII SRAM Control MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SSIP 功能描述:开发软件 Crypto Bundle BU Solution RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-TRIETHERNET 功能描述:开发软件 Triple Speed Ethernt MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors