参数资料
型号: IPR-SDRAM/DDR
厂商: Altera
文件页数: 79/106页
文件大小: 0K
描述: IP DDR SDRAM CONTROLLER RENEW
标准包装: 1
系列: *
类型: MegaCore
功能: DDR SDRAM 控制器
许可证: 续用许可证
A. Manual Timing Settings
Parameters
Table A–1 shows the resynchronization options.
For more information on the resynchronization options, refer to “Resynchronization”
Table A–1. Resynchronization Options (Part 1 of 2)
Parameter
Range
Description
Reclock resynchronized data
to the positive edge
Automatic, Always, or Never When this option is set to “Always” the wizard inserts a set
of positive edge system clock registers in the read data path
and delays the read data valid signal appropriately. The extra
registers are useful if you are resynchronizing with a phase
other than the positive edge of the system clock, but at the
expense of a clock cycle of latency. Choosing Never
produces lower latency. However, it is then your
responsibility to reclock the read data to the positive edge of
the system clock. When this option is set to Automatic , the
wizard decides whether or not to insert the extra set of
registers based on the choice of resynchronization edge and
system clock.
When the resynchronization clock phase is close to the
positive edge of the system clock, this option inserts an
additional set of registers, clocked on the negative edge of
system clock, between the resynchronization clock domain
and the system clock domain.
Manual resynchronization
control
Resynchronize captured read
data in cycle
Resynchronization clock
setting
On or off
0 to 6
0 ( clk , rising edge),
90 ( write_clk , falling
edge),
180 ( clk , falling edge)
270 ( write_clk , rising
edge), or
dedicated
Turn on to specify the details of the resynchronization clock.
Otherwise, the details are calculated automatically based on
system timing. You must turn on this option when you turn
on the DQS mode and the fedback PLL options.
The number of cycles of delay to allow for the round trip
delay.
Defines which clock to use for resynchronization: the system
clock, the write clock (a 90 ° advanced version of the system
clock), or a dedicated resynchronization clock. Also defines
which edge of the chosen clock to use to resynchronize the
captured data. If you select falling edge, the data path
automatically inserts inverters on the clock inputs to the
resynchronization registers.
When the resynchronization clock is set to either the system
clock or the write clock, you cannot alter the phase of the
resynchronization clock. To alter the resynchronization phase
clock, select the resynchronization clock as dedicated and
set the required phase.
? March 2009
Altera Corporation
相关PDF资料
PDF描述
GEC49DRYH CONN EDGECARD 98POS DIP .100 SLD
GCC25DRXS CONN EDGECARD 50POS DIP .100 SLD
IPR-RSENC IP REED-SOLOMON ENCODER RENEW
EBC43DRTS CONN EDGECARD 86POS DIP .100 SLD
ECC36DCAI CONN EDGECARD 72POS R/A .100 SLD
相关代理商/技术参数
参数描述
IP-RSENC 功能描述:开发软件 Reed-Solomon Encoder MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SLITE2 功能描述:开发软件 SerialLite II MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SRAM/QDRII 功能描述:开发软件 QDRII SRAM Control MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SSIP 功能描述:开发软件 Crypto Bundle BU Solution RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-TRIETHERNET 功能描述:开发软件 Triple Speed Ethernt MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors