
PRELIMINARY
INVERSE MULTIPLEXING OVER ATM
PM7341 S/UNI-IMA-84
DATASHEET
PMC-2000223
ISSUE 4
INVERSE MULTIPLEXING OVER ATM
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
378
Note that there is no CRC protection for data in diagnostic mode.
By providing both Read Command registers and write command registers, a
back-to-back read/write access may be performed to the SDRAM.
12.7 IMA Performance Parameters and Failure Alarms Support
A number of IMA performance parameters and failure alarms are defined in the
IMA spec (section 12.2.2) as a standardized interface to IMA unit management
functions. The following text summarizes the support provided by S/UNI-IMA-84
to implement those functions.
Table 36
IMA Performance Parameter Support
Req.
Performance
parameter
S/UNI-IMA-84 support
R-125
IV-IMA
O-20
OIF-IMA
R-126
SES-IMA
NE RX IMA defects will cause interrupts.
R-127
SES-IMA-FE
RDI-IMA defects will cause interrupts.
R-128
UAS-IMA
Derived from SES-IMA, no support.
R-129
UAS-IMA-FE
Derived from SES-IMA-FE, no support.
R-130
TX-UUS-IMA
S/UNI-IMA-84 provides read access to the TX LSM in
RIPP link context records. Note after link start-up, it is
up to PM to put the LSM into UNUSABLE state.
R-131
RX-UUS-IMA
S/UNI-IMA-84 provides read access to the RX LSM in
link context records. Note after link start-up, it is up to
PM to put the LSM into UNUSABLE state.
R-132
TX-UUS-IMA-FE
S/UNI-IMA-84 may generate an interrupt once FE TX
LSM enters UNUSABLE state.
R-133
RX-UUS-IMA-FE
S/UNI-IMA-84 may generate an interrupt once FE RX
LSM enters UNUSABLE state.