收藏本站
参数资料
型号： ADUC834BSZ
厂商： Analog Devices Inc
文件页数： 16/80页
文件大小： 0K
描述： IC ADC DUAL16/24BIT W/MCU 52MQFP
产品培训模块： Process Control
标准包装： 1
系列： MicroConverter® ADuC8xx
核心处理器： 8052
芯体尺寸： 8-位
速度： 12.58MHz
连通性： EBI/EMI，I²C，SPI，UART/USART
外围设备： POR，PSM，PWM，温度传感器，WDT
输入/输出数： 34
程序存储器容量： 62KB（62K x 8）
程序存储器类型： 闪存
EEPROM 大小： 4K x 8
RAM 容量： 2.25K x 8
电压 - 电源 (Vcc/Vdd)： 2.7 V ~ 5.25 V
数据转换器： A/D 3x16b，4x24b; D/A 1x12b
振荡器型： 内部
工作温度： -40°C ~ 125°C
封装/外壳： 52-QFP
包装： 托盘
产品目录页面： 738 (CN2011-ZH PDF)
REV. A
ADuC834
–23–
-
MODULATOR
PROGRAMMABLE
DIGITAL
FILTER
-
ADC
BUFFER
AGND
AV
DD
REFIN(–) REFIN(+)
CHOP
AIN1
AIN2
AIN3
AIN4
OUTPUT
AVERAGE
OUTPUT
SCALING
DIGTAL OUTPUT
RESULT WRITTEN
TO ADC0H/M/L
SFRS
PGA
CHOP
OUTPUT AVERAGE
AS PART OF THE CHOPPING
IMPLEMENTATION, EACH
DATA-WORD OUTPUT
FROM THE FILTER IS
SUMMED AND AVERAGED
WITH ITS PREDECESSOR
TO NULL ADC CHANNEL
OFFSET ERRORS.
-
ADC
THE
-
ARCHITECTURE
ENSURES 24 BITS NO
MISSING CODES. THE
ENTIRE
-
ADC IS
CHOPPED TO REMOVE
DRIFT ERROR.
DIFFERENTIAL
REFERENCE
THE EXTERNAL REFERENCE
INPUT TO THE ADuC834 IS
DIFFERENTIAL AND
FACILITATES RATIOMETRIC
OPERATION. THE EXTERNAL
REFERENCE VOLTAGE IS
SELECTED VIA THE XREF0 BIT
IN ADC0CON.
REFERENCE DETECT
CIRCUITRY TESTS FOR OPEN OR
SHORTED REFERENCE INPUTS.
ANALOG INPUT CHOPPING
THE INPUTS ARE
ALTERNATELY REVERSED
THROUGH THE
CONVERSION CYCLE.
CHOPPING YIELDS
EXCELLENT ADC OFFSET
AND OFFSET DRIFT
PERFORMANCE.
BURNOUT CURRENTS
TWO 100nA BURNOUT
CURRENTS ALLOW THE
USER TO EASILY DETECT
IF A TRANSDUCER HAS
BURNED OUT OR GONE
OPEN-CIRCUIT.
ANALOG MULTIPLEXER
A DIFFERENTIAL MULTIPLEXER
ALLOWS SELECTION OF THREE
FULLY DIFFERENTIAL PAIR OPTIONS AND
ADDITIONAL INTERNAL SHORT OPTION
(AIN2–AIN2). THE MULTIPLEXER IS
CONTROLLED VIA THE CHANNEL
SELECTION BITS IN ADC0CON.
BUFFER AMPLIFIER
THE BUFFER AMPLIFIER
PRESENTS A HIGH
IMPEDANCE INPUT STAGE
FOR THE ANALOG INPUTS,
ALLOWING SIGNIFICANT
EXTERNAL SOURCE
IMPEDANCES.
THE MODULATOR PROVIDES
A HIGH FREQUENCY 1-BIT
DATA STREAM (THE OUTPUT
OF WHICH IS ALSO CHOPPED)
TO THE DIGITAL FILTER,
THE DUTY CYCLE OF WHICH
REPRESENTS THE SAMPLED
ANALOG INPUT VOLTAGE.
-
MODULATOR
PROGRAMMABLE
DIGITAL FILTER
THE SINC3 FILTER REMOVES
QUANTIZATION NOISE INTRODUCED
BY THE MODULATOR. THE UPDATE
RATE AND BANDWIDTH OF THIS
FILTER ARE PROGRAMMABLE
VIA THE SF SFR.
THE OUPUT WORD FROM THE
DIGITAL FILTER IS SCALED
BY THE CALIBRATION
COEFFICIENTS BEFORE
BEING PROVIDED AS
THE CONVERSION RESULT.
OUTPUT SCALING
PROGRAMMABLE GAIN
AMPLIFIER
THE PROGRAMMABLE
GAIN AMPLIFIER ALLOWS
EIGHT UNIPOLAR AND
EIGHT BIPOLAR INPUT
RANGES FROM 20mV TO
2.56V (EXT VREF = 2.5V).
MUX
PRIMARY AND AUXILIARY ADC CIRCUIT DESCRIPTION
Overview
The ADuC834 incorporates two independent - ADCs (primary
and auxiliary) with on-chip digital filtering intended for the measure-
ment of wide dynamic range, low frequency signals such as those
in weigh-scale, strain gage, pressure transducer, or temperature
measurement applications.
Primary ADC
This ADC is intended to convert the primary sensor input. The
input is buffered and can be programmed for one of eight input
ranges from
± 20 mV to ± 2.56 V being driven from one of three
differential input channel options AIN1/2, AIN3/4, or AIN3/2.
The input channel is internally buffered, allowing the part to
handle significant source impedances on the analog input and
allowing R/C filtering (for noise rejection or RFI reduction) to be
placed on the analog inputs if required. On-chip burnout currents
can also be turned on. These currents can be used to check that
a transducer on the selected channel is still operational before
attempting to take measurements.
The ADC employs a
-
conversion technique to realize up to
24 bits of no missing codes performance. The - modulator con-
verts the sampled input signal into a digital pulse train whose duty
cycle contains the digital information. A Sinc
3 programmable low-
pass filter is then employed to decimate the modulator output data
stream to give a valid data conversion result at programmable
output rates from 5.35 Hz (186.77 ms) to 105.03 Hz (9.52 ms).
A chopping scheme is also employed to minimize ADC offset errors.
A block diagram of the primary ADC is shown in Figure 7.
Figure 7. Primary ADC Block Diagram
相关PDF资料
PDF描述
VI-JVP-IY-F2 CONVERTER MOD DC/DC 13.8V 50W
VE-B3D-IY-F2 CONVERTER MOD DC/DC 85V 50W
AT91SAM9XE256-QU MCU ARM9 256K FLASH 208-PQFP
VI-JVN-IY-F4 CONVERTER MOD DC/DC 18.5V 50W
VI-JVM-IY-F2 CONVERTER MOD DC/DC 10V 50W
相关代理商/技术参数
参数描述
ADUC836 制造商:AD 制造商全称:Analog Devices 功能描述:MicroConverter, Dual 16-Bit-ADCs with Embedded 62 kB Flash MCU
ADUC836_02 制造商:AD 制造商全称:Analog Devices 功能描述:MicroConverter, Dual 16-Bit ADCs with Embedded 62 kB Flash MCU
ADUC836BCP 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述:
ADUC836BCPZ 功能描述:IC MCU 62K FLASH ADC/DAC 56LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC8xx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA，UART/USART 外围设备:欠压检测/复位，LED，POR，PWM，WDT 输入/输出数:16 程序存储器容量:4KB（4K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
ADUC836BCPZ-REEL 功能描述:IC MCU 62K FLASH ADC/DAC 56LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC8xx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA，UART/USART 外围设备:欠压检测/复位，LED，POR，PWM，WDT 输入/输出数:16 程序存储器容量:4KB（4K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*