- 您现在的位置：买卖IC网 > PDF目录1924 > IDT82P2828BHG (IDT, Integrated Device Technology Inc)IC LIU T1/J1/E1 28+1CH 640-PBGA PDF资料下载
参数资料
| 型号： | IDT82P2828BHG |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 93/154页 |
| 文件大小： | 0K |
| 描述： | IC LIU T1/J1/E1 28+1CH 640-PBGA |
| 标准包装： | 5 |
| 类型： | 线路接口装置（LIU） |
| 规程： | E1 |
| 电源电压： | 3.13 V ~ 3.47 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 640-BGA 裸露焊盘 |
| 供应商设备封装： | 640-PBGA-EP（31x31） |
| 包装： | 托盘 |
| 其它名称： | 82P2828BHG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页当前第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页第143页第144页第145页第146页第147页第148页第149页第150页第151页第152页第153页第154页
IDT82P2828
28(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
Functional Description
43
February 6, 2009
3.5
DIAGNOSTIC FACILITIES
The diagnostic facilities include:
BPV (Bipolar Violation) / CV (Code Violation) detection and BPV
insertion;
EXZ (Excessive Zero) detection;
LOS (Loss Of Signal) detection;
AIS (Alarm Indication Signal) detection and generation;
Pattern generation and detection, including PRBS (Pseudo Ran-
dom Bit Sequence), ARB (Arbitrary Pattern) and IB (Inband Loop-
back).
The above defects, alarms or patterns can be counted by an internal
Error Counter, indicated by the respective interrupt bit and indicated by
RMFn or TMFn.
For diagnostic purposes, loopbacks and channel 0 monitoring can
also be implemented.
3.5.1
BIPOLAR VIOLATION (BPV) / CODE VIOLATION (CV)
DETECTION AND BPV INSERTION
3.5.1.1 Bipolar Violation (BPV) / Code Violation (CV) Detection
BPV/CV is monitored in both the receive path and the transmit path.
BPV is detected when the data is AMI coded and CV is detected when
the data is B8ZS/HDB3 coded. If the transmit system interface is in
Transmit Single Rail NRZ Format mode, the BPV/CV detection is
disabled in the transmit path automatically.
A BPV is detected when two consecutive pulses of the same polarity
are received.
A CV is detected when two consecutive BPVs of the same polarity
that are not a part of the B8ZS/HDB3 zero substitution are received.
When BPV/CV is detected in the receive path, the Line Bipolar Viola-
tion LBPV_IS bit (b4, INTS2,...) will be set and an interrupt will be
reported by INT if not masked by the LBPV_IM bit (b4, INTM2,...).
When BPV/CV is detected in the transmit path, the System Bipolar
Violation SBPV_IS bit (b5, INTS2,...) will be set and an interrupt will be
reported by INT if not masked by the SBPV_IM bit (b5, INTM2,...).
BPV/CV may be counted by an internal Error Counter or may be indi-
cated by the RMFn or TMFn pin. Refer to Section 3.5.6 Error Counter
Indication respectively.
3.5.1.2 Bipolar Violation (BPV) Insertion
The BPV can only be inserted in the transmit path.
A BPV will be inserted on the next available mark in the data stream
to be transmitted by writing a ‘1’ to the BPV_INS bit (b6, ERR,...). This
bit will be reset once BPV insertion is done.
3.5.2
EXCESSIVE ZEROES (EXZ) DETECTION
EXZ is monitored in both the receive path and the transmit path.
Different line code has different definition of the EXZ. The
IDT82P2828 provides two standards of EXZ definition for each kind of
line code rule. The standards are ANSI and FCC, as selected by the
When EXZ is detected in the receive path, the LEXZ_IS bit (b2,
INTS2,...) will be set and an interrupt will be reported by INT if not
masked by the LEXZ_IM bit (b2, INTM2,...).
When EXZ is detected in the transmit path, the SEXZ_IS bit (b3,
INTS2,...) will be set and an interrupt will be reported by INT if not
masked by the SEXZ_IM bit (b3, INTM2,...).
Table-16 EXZ Definition
Line Code
Rule
Definition
ANSI (EXZ_DEF = 0)
FCC (EXZ_DEF = 1)
AMI
An EXZ is detected when
any string of more than 15
consecutive
‘0’s
are
received.
T1/J1 - An EXZ is detected
when any string of more
than 80 consecutive ‘0’s are
received.
E1 - An EXZ is detected
when any string of more
than 15 consecutive ‘0’s are
received.
B8ZS
An EXZ is detected when
any string of more than 7
consecutive
‘0’s
are
received.
An EXZ is detected when
any string of more than 7
consecutive
‘0’s
are
received.
HDB3
An EXZ is detected when
any string of more than 3
consecutive
‘0’s
are
received.
An EXZ is detected when
any string of more than 3
consecutive
‘0’s
are
received.
Note:
If the transmit system interface is in Transmit Single Rail NRZ Format mode, the EXZ is
detected according to the standard of AMI.
相关PDF资料 |
PDF描述 |
|---|---|
| IDT82P2916BFG | IC LIU T1/E1/J1 16CH SH 484BGA |
| IDT82P5088BBG | IC LIU T1/E1/J1 OCTAL 256PBGA |
| IDT82V2041EPPG | IC LIU T1/J1/E1 1CH 44-TQFP |
| IDT82V2042EPFG | IC LIU T1/J1/E1 2CH SHORT 80TQFP |
| IDT82V2044EPFG | IC LIU T1/E1 QUAD SHORT 128-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT82P2916 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel High-Density T1/E1/J1 Line Interface Unit |
| IDT82P2916BFG | 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA RoHS:是 类别:集成电路 (IC) >> 接口 - 电信 系列:- 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 06/Feb/2012 标准包装:750 系列:* |
| IDT82P2916BFG8 | 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA |
| IDT82P5088 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:Universal Octal T1/E1/J1 LIU with Integrated Clock Adapter |
| IDT82P5088BBBLANK | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:Universal Octal T1/E1/J1 LIU with Integrated Clock Adapter |
发布紧急采购，3分钟左右您将得到回复。