参数资料
型号: RK80532RC056128
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 2400 MHz, MICROPROCESSOR, CPGA478
封装: FLIP CHIP, PGA2-478
文件页数: 7/99页
文件大小: 4142K
代理商: RK80532RC056128
Datasheet
15
Electrical Specifications
2.4
Voltage Identification
The VID specification for Celeron processor on 0.13 micron process is supported by the Intel
Pentium 4 Processor VR-Down Design Guidelines. The voltage set by the VID pins is the
maximum voltage allowed by the processor. A minimum voltage is provided in Table 7 and
changes with frequency. This allows processors running at a higher frequency to have a relaxed
minimum voltage specification. The specifications have been set such that one voltage regulator
can work with all supported frequencies.
The Celeron processor on 0.13 micron process uses five voltage identification pins, VID[4:0], to
support automatic selection of power supply voltages. The VID pins for the Celeron processor on
0.13 micron process are open drain outputs driven by the processor VID circuitry. The VID signals
rely on pull-up resistors tied to a 3.3V (max) supply to set the signal to a logic high level. These
pull-up resistors may be either external logic on the motherboard, or internal to the Voltage
Regulator. Table 3 specifies the voltage levels corresponding to the states of VID[4:0]. A 1 in this
table refers to a high voltage level, and a 0 refers to low voltage level. The definition provided in
Table 3 is not related in any way to previous P6 processors or VRs, but is compatible with the
Pentium 4 processor in the 478-pin package. If the processor socket is empty (VID[4:0] = 11111) or
the voltage regulation circuit cannot supply the voltage that is requested, it must disable itself. See
the Intel Pentium 4 Processor VR-Down Design Guidelines for more details.
Power source characteristics must be stable whenever the supply to the voltage regulator is stable.
Refer to the Figure 14 for timing details of the power up sequence. Also refer to the appropriate
platform design guide listed in Table 1 for implementation details.
The Voltage Identification circuit requires an independent 1.2V supply. This voltage must be routed
to the processor VCCVID pin. Table 2 and Figure 1 describe the voltage and current requirements
of the VCCVID pin.
NOTES:
1. This specification applies to both static and transient components. The rising edge of VCCVID must be
monotonic from 0 to 1.1 V. See Figure 1 for current requirements. In this case, monotonic is defined as
continuously increasing with less than 50 mV of peak to peak noise for any width greater than 2 ns
superimposed on the rising edge.
Table 2.
VCCVID Pin Voltage Requirements
Symbol
Parameter
Min
Typ
Max
Unit
Notes
VCCVID
VCC for voltage identification circuit.
–5%
1.2
+10%
V
1
Figure 1. VCCVID Pin Voltage and Current Requirements
VCCVID
1.2 V + 10%
1.2 V - 5%
4 ns
VIDs latched
30 mA
1.0 V
1 mA
相关PDF资料
PDF描述
RK80546KG0882MM 64-BIT, 3200 MHz, MICROPROCESSOR, CPGA604
RK80546KG1042MM 64-BIT, 3600 MHz, MICROPROCESSOR, CPGA604
RK80546KG0802MM 64-BIT, 3000 MHz, MICROPROCESSOR, CPGA604
RK80546PG0801M 32-BIT, 3000 MHz, MICROPROCESSOR, CPGA478
RK80546PE0721M 32-BIT, 2800 MHz, MICROPROCESSOR, CPGA478
相关代理商/技术参数
参数描述
RK80532RC060128S L6ZY 制造商:Intel 功能描述:MPU Celeron? Processor 0.13um 2.5GHz 478-Pin FCPGA2 制造商:Intel 功能描述:NORTHWOOD; MPU CELERON 0.13UM 2.5GHZ 478PIN FCPGA2 - Trays
RK80532RC060128SL72B 功能描述:IC CELERON 2.5GHZ 478FC-PGA2 RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微处理器 系列:- 标准包装:2 系列:MPC8xx 处理器类型:32-位 MPC8xx PowerQUICC 特点:- 速度:133MHz 电压:3.3V 安装类型:表面贴装 封装/外壳:357-BBGA 供应商设备封装:357-PBGA(25x25) 包装:托盘
RK80532RC064128 制造商:Rochester Electronics LLC 功能描述:- Bulk
RK805346RE067256 制造商:Intel 功能描述:TRAY CELERON D 330 - Trays
RK80546KF0871M 制造商:Rochester Electronics LLC 功能描述:- Bulk