参数资料
型号: RK80532RC056128
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 2400 MHz, MICROPROCESSOR, CPGA478
封装: FLIP CHIP, PGA2-478
文件页数: 86/99页
文件大小: 4142K
代理商: RK80532RC056128
Datasheet
87
Features
7.2.3
Stop-Grant State—State 3
When the STPCLK# pin is asserted, the Stop-Grant state of the processor is entered 20 bus clocks
after the response phase of the processor-issued Stop-Grant Acknowledge special bus cycle.
Since the AGTL+ signal pins receive power from the system bus, these pins should not be driven
(allowing the level to return to VCC) for minimum power drawn by the termination resistors in this
state. In addition, all other input pins on the system bus should be driven to the inactive state.
BINIT# will not be serviced while the processor is in Stop-Grant state. The event will be latched
and can be serviced by software upon exit from the Stop-Grant state.
RESET# will cause the processor to immediately initialize itself, but the processor will stay in
Stop-Grant state. A transition back to the Normal state will occur with the de-assertion of the
STPCLK# signal. When re-entering the Stop-Grant state from the Sleep state, STPCLK# should
only be de-asserted one or more bus clocks after the de-assertion of SLP#.
A transition to the HALT/Grant Snoop state will occur when the processor detects a snoop on the
system bus (see Section 7.2.4). A transition to the Sleep state (see Section 7.2.5) will occur with the
assertion of the SLP# signal.
While in the Stop-Grant State, SMI#, INIT#, BINIT# and LINT[1:0] will be latched by the
processor, and only serviced when the processor returns to the Normal State. Only one occurrence
of each event will be recognized upon return to the Normal state.
While in Stop-Grant state, the processor will process snoops on the system bus and it will latch
interrupts delivered on the system bus.
The PBE# signal can be driven when the processor is in Stop-Grant state. PBE# will be asserted if
there is any pending interrupt latched within the processor. Pending interrupts that are blocked by
the EFLAGS.IF bit being clear will still cause assertion of PBE#. Assertion of PBE# indicates to
system logic that it should return the processor to the Normal state.
7.2.4
HALT/Grant Snoop State—State 4
The processor will respond to snoop or interrupt transactions on the system bus while in Stop-Grant
state or in AutoHALT Power Down state. During a snoop or interrupt transaction, the processor
enters the HALT/Grant Snoop state. The processor will stay in this state until the snoop on the
system bus has been serviced (whether by the processor or another agent on the system bus) or the
interrupt has been latched. After the snoop is serviced or the interrupt is latched, the processor will
return to the Stop-Grant state or AutoHALT Power Down state, as appropriate.
相关PDF资料
PDF描述
RK80546KG0882MM 64-BIT, 3200 MHz, MICROPROCESSOR, CPGA604
RK80546KG1042MM 64-BIT, 3600 MHz, MICROPROCESSOR, CPGA604
RK80546KG0802MM 64-BIT, 3000 MHz, MICROPROCESSOR, CPGA604
RK80546PG0801M 32-BIT, 3000 MHz, MICROPROCESSOR, CPGA478
RK80546PE0721M 32-BIT, 2800 MHz, MICROPROCESSOR, CPGA478
相关代理商/技术参数
参数描述
RK80532RC060128S L6ZY 制造商:Intel 功能描述:MPU Celeron? Processor 0.13um 2.5GHz 478-Pin FCPGA2 制造商:Intel 功能描述:NORTHWOOD; MPU CELERON 0.13UM 2.5GHZ 478PIN FCPGA2 - Trays
RK80532RC060128SL72B 功能描述:IC CELERON 2.5GHZ 478FC-PGA2 RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微处理器 系列:- 标准包装:2 系列:MPC8xx 处理器类型:32-位 MPC8xx PowerQUICC 特点:- 速度:133MHz 电压:3.3V 安装类型:表面贴装 封装/外壳:357-BBGA 供应商设备封装:357-PBGA(25x25) 包装:托盘
RK80532RC064128 制造商:Rochester Electronics LLC 功能描述:- Bulk
RK805346RE067256 制造商:Intel 功能描述:TRAY CELERON D 330 - Trays
RK80546KF0871M 制造商:Rochester Electronics LLC 功能描述:- Bulk