参数资料
型号: RK80532RC056128
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 2400 MHz, MICROPROCESSOR, CPGA478
封装: FLIP CHIP, PGA2-478
文件页数: 88/99页
文件大小: 4142K
代理商: RK80532RC056128
Datasheet
89
Features
addition, a thermal solution that is significantly under-designed may not be capable of cooling the
processor even when the TCC is active continuously. Refer to the Intel
Pentium 4 Processor
with 512-KB L2 Cache on 0.13 Micron Process Thermal Design Guide for information on
designing a thermal solution.
The duty cycle for the TCC, when activated by the Thermal Monitor, is factory configured and
cannot be modified. The Thermal Monitor does not require any additional hardware, software
drivers, or interrupt handling routines.
The TCC may also be activated via On-Demand mode. If bit 4 of the ACPI Thermal Monitor
Control Register is written to a 1 the TCC will be activated immediately, independent of the
processor temperature. When using On-Demand mode to activate the TCC, the duty cycle of the
clock modulation is programmable via bits 3:1 of the same ACPI Thermal Monitor Control
Register. In automatic mode, the duty cycle is fixed, however in On-Demand mode, the duty cycle
can be programmed from 12.5% on/ 87.5% off, to 87.5% on/12.5% off in 12.5% increments. On-
Demand mode may be used while Automatic mode is enabled. However, if the system tries to
enable the TCC via On-Demand mode while automatic mode is enabled and a high temperature
condition exists, the duty cycle of the automatic mode will override the duty cycle selected by the
On-Demand mode.
An external signal, PROCHOT# (processor hot) is asserted when the processor detects that its
temperature is at the thermal trip point. Bus snooping and interrupt latching are also active while
the TCC is active. The temperature at which the thermal control circuit activates is not user
configurable and is not software visible.
Besides the thermal sensor and TCC, the Thermal Monitor feature also includes one ACPI register,
performance monitoring logic, bits in three model specific registers (MSR), and one I/O pin
(PROCHOT#). All are available to monitor and control the state of the Thermal Monitor feature.
Thermal Monitor can be configured to generate an interrupt upon the assertion or de-assertion of
PROCHOT#.
If automatic mode is disabled, the processor will be operating out of specification. Regardless of
enabling of the automatic or On-Demand modes, in the event of a catastrophic cooling failure, the
processor will automatically shut down when the silicon has reached a temperature of
approximately 135 °C. At this point the system bus signal THERMTRIP# will go active and stay
active until RESET# has been initiated. THERMTRIP# activation is independent of processor
activity and does not generate any bus cycles. If THERMTRIP# is asserted, processor core voltage
(VCC) must be removed within the time frame defined in Table 19.
相关PDF资料
PDF描述
RK80546KG0882MM 64-BIT, 3200 MHz, MICROPROCESSOR, CPGA604
RK80546KG1042MM 64-BIT, 3600 MHz, MICROPROCESSOR, CPGA604
RK80546KG0802MM 64-BIT, 3000 MHz, MICROPROCESSOR, CPGA604
RK80546PG0801M 32-BIT, 3000 MHz, MICROPROCESSOR, CPGA478
RK80546PE0721M 32-BIT, 2800 MHz, MICROPROCESSOR, CPGA478
相关代理商/技术参数
参数描述
RK80532RC060128S L6ZY 制造商:Intel 功能描述:MPU Celeron? Processor 0.13um 2.5GHz 478-Pin FCPGA2 制造商:Intel 功能描述:NORTHWOOD; MPU CELERON 0.13UM 2.5GHZ 478PIN FCPGA2 - Trays
RK80532RC060128SL72B 功能描述:IC CELERON 2.5GHZ 478FC-PGA2 RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微处理器 系列:- 标准包装:2 系列:MPC8xx 处理器类型:32-位 MPC8xx PowerQUICC 特点:- 速度:133MHz 电压:3.3V 安装类型:表面贴装 封装/外壳:357-BBGA 供应商设备封装:357-PBGA(25x25) 包装:托盘
RK80532RC064128 制造商:Rochester Electronics LLC 功能描述:- Bulk
RK805346RE067256 制造商:Intel 功能描述:TRAY CELERON D 330 - Trays
RK80546KF0871M 制造商:Rochester Electronics LLC 功能描述:- Bulk