参数资料
| 型号： | KIT13892VLEVBEJ |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 104/158页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MC13892 |
| 标准包装： | 1 |
| 主要目的： | 电源管理和用户界面 |
| 嵌入式： | 否 |
| 已用 IC / 零件： | MC13892 |
| 主要属性： | 10 位 ADC，4 输出降压转换器，12 LDO |
| 次要属性： | 与 i.MX51、i.MX37、i.MX35、i.MX27 一起使用 |
| 已供物品： | 板，线缆，文档 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页当前第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页第143页第144页第145页第146页第147页第148页第149页第150页第151页第152页第153页第154页第155页第156页第157页第158页
FUNCTIONAL DEVICE OPERATION
ADC SUBSYSTEM
CHANNEL 5 ADIN5 AND BATTERY THERMISTOR AND BATTERY DETECT
On channel 5, ADIN5 may be used as a general purpose unscaled input, but in a typical application, ADIN5 is used to read
out the battery pack thermistor. The thermistor will have to be biased with an external pull-up to a voltage rail greater than the
ADC input range. In order to save current when the thermistor reading is not required, it can be biased from one of the general
purpose IO's such as GPO1. A resistor divider network should assure the resulting voltage falls within the ADC input range in
When the application is on and supplied by the charger, a battery removal can be detected by a battery thermistor presence
check. When the thermistor terminal becomes high-impedance, the battery is considered being removed. This detection function
is available at the ADIN5 input and can be enabled by setting the BATTDETEN bit. The voltage at ADIN5 is compared to the
output voltage of the GPO1 driver, and when the voltage exceeds the battery removal detect threshold, the sense bit
BATTDETBS is made high and after a debounce the BATTDETBI interrupt is generated.
Table 90. Battery Removal Detect Specification
Parameter
Condition
Min
Typ
Max
Units
Battery Removal Detect
Threshold (84)
–
31/32 * GPO1
–
V
Notes
84. This is equivalent to a 10 kOhm pull-up and a 10 kOhm thermistor at -35 °C.
CHANNEL 6 ADIN6 AND COIN CELL VOLTAGE
On channel 6, ADIN6 may be used as a general purpose unscaled input.
In addition, on channel 6, the voltage of the coin cell connected to the LICELL pin can be read (LICON=1). Since the voltage
range of the coin cell exceeds the input voltage range of the ADC, the LICELL voltage is first scaled as V(LICELL)*2/3. In case
the voltage at LICELL drops below the coin cell disconnect threshold (see Clock Generation and Real Time Clock ), the voltage
at LICELL can still be read through the ADC.
Table 91. Coin Cell Voltage Reading Coding
Conversion Code
ADDn[9:0]
1 111 111 111
1 000 000 000
0 000 000 000
Voltage at ADC input (V)
2.400
1.200
0.000
Voltage at LICELL (V)
3.6
1.8
0.0
CHANNEL 7 ADIN7 AND ADIN7B, UID AND DIE TEMPERATURE
On channel 7, ADIN7 may be used as a general purpose unscaled input (ADIN7DIV = 0) or as a divide by 2 scaled input
(ADIN7DIV = 1). The latter allows converting signals that are up to twice the ADC converter core input range. In a typical
application, an ambient light sensor is connected here.
A second general purpose input ADIN7B is available on channel 7. This input is muxed on the GPO4 pin. The input voltage
can be scaled by setting the ADIN7DIV bit. In the application, a second ambient light sensor is supposed to be connected here.
Note that the GPO4 will have to be configured to allow for the proper routing of GPO4 to the ADC, see General Purpose Outputs .
In addition, on channel 7, the voltage of the USB ID line connected to the UID pin can be read. Since the voltage range of the
ID line exceeds the input voltage range of the ADC, the UID voltage is first scaled as V(UID)/2.
Table 92. UID Voltage Reading Coding
Conversion Code Voltage at ADC input (V)
ADDn[9:0]
Voltage at UID (V)
1 111 111 111
0 000 000 000
2.400
0.000
4.80 - 5.25
0.0
Also on channel 7, the die temperature can be read out. The relation between the read out code and temperature is given in
MC13892
Analog Integrated Circuit Device Data
104
Freescale Semiconductor
相关PDF资料 |
PDF描述 |
|---|---|
| KIT17C724EPEVBE | KIT FOR 17C7242CH HBRIDGE PWR IC |
| KIT33810EKEVME | BOARD EVAL FOR MC33810 |
| KIT33811EGEVBE | KIT EVAL 33811 SOLENOID MON IC |
| KIT33812ECUEVME | KIT DESIGN FOR 33812/S12P |
| KIT33812EKEVBE | BOARD EVALUATION FOR MC33812 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| KIT-1395 | 制造商:Anderson Power Products (APP) 功能描述:KIT |
| Kit-1395G1 | 制造商:ANDERSON POWER PRODUCTS 功能描述:KIT |
| Kit-1395G10 | 制造商:ANDERSON POWER PRODUCTS 功能描述:KIT |
| Kit-1395G2 | 制造商:ANDERSON POWER PRODUCTS 功能描述:KIT |
| Kit-1395G3 | 制造商:ANDERSON POWER PRODUCTS 功能描述:KIT |
发布紧急采购，3分钟左右您将得到回复。