参数资料
型号: M37274MA-XXXSP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, MICROCONTROLLER, PDIP52
封装: 0.600 INCH, 1.778 MM PITCH, SHRINK, PLASTIC, DIP-52
文件页数: 106/131页
文件大小: 2049K
代理商: M37274MA-XXXSP
76
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
M37274MA-XXXSP
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
paramentic
limits
are
subject
to change.
MITSUBISHI MICROCOMPUTERS
(11) Multiline Display
The M37274MA-XXXSP can ordinarily display 16 lines on the CRT
screen by displaying 16 blocks at different vertical positions. In addi-
tion, it can display up to 12 lines by using OSD interrupts.
An OSD interrupt request occurs at the point at which display of each
block has been completed. In other words, when a scanning line
reaches the point of the display position (specified by the vertical
position registers) of a certain block, the character display of that
block starts, and an interrupt occurs at the point at which the scan-
ning line exceeds the block. The mode in which an OSD interrupt
occurs is different depending on the setting of the raster color regis-
ter (refer to Figure 89).
When bit 7 of the raster color register is “0”
An OSD interrupt occurs at the end of block display in the OSD
and the EXOSD mode.
When bit 7 of the raster color register is “1”
An OSD interrupt occurs at the end of block display in the CC mode.
Notes 1: An OSD interrupt does not occur at the end of display when
the block is not displayed. In other words, if a block is set to
off display by the display control bit of the block control reg-
ister (addresses 00D016 to 00DB16), an OSD interrupt re-
quest does not occur (refer to Figure 83 (A)).
2: When another block display appeares while one block is
displayed, an OSD interrupt request occurs only once at
the end of the another block display (refer to Figure 83 (B)).
3: On the screen setting window, an OSD interrupt occurs
even at the end of the CC mode block (off display) out of
window (refer to Figure 83 (C)).
Fig. 83. Note on Occurence of OSD Interrupt
(B)
(C)
Block 1 (on display)
Block 2 (on display)
Block 3 (on display)
Block 4 (on display)
Block 1 (on display)
Block 2 (on display)
Block 3 (off display)
Block 4 (off display)
“OSD interrupt request”
No
“OSD interrupt request”
Block 1
Block 2
“OSD interrupt request”
Block 1
Block 2
Block 3
On display (OSD interrupt request occurs
at the end of block display)
Off display (OSD interrupt request does
not occur at the end of block display)
In CC mode
Window
No
“OSD interrupt request”
No
“OSD interrupt request”
(A)
相关PDF资料
PDF描述
M37373M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
M37409M2-XXXFP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M37413E6HXXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP80
M37413M4-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
M37420M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
相关代理商/技术参数
参数描述
M37276MF248SP 制造商:MITSUBISHI 功能描述:*
M37276MF2575P 制造商:MITSUBISHI 功能描述:*
M37276MF260SP 制造商:MITSUBISHI 功能描述:*
M37276MF300SP 制造商:MITSUBISHI 功能描述:*
M37276MF301SP 制造商:MITSUBISHI 功能描述:*