参数资料
型号: M37274MA-XXXSP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, MICROCONTROLLER, PDIP52
封装: 0.600 INCH, 1.778 MM PITCH, SHRINK, PLASTIC, DIP-52
文件页数: 85/131页
文件大小: 2049K
代理商: M37274MA-XXXSP
57
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
M37274MA-XXXSP
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
paramentic
limits
are
subject
to change.
MITSUBISHI MICROCOMPUTERS
(2) Display Position
The display positions of characters are specified by a block. There
are 12 blocks, blocks 1 to 12. Up to 36 characters can be displayed
in each block (refer to (6) Memory for OSD).
The display position of each block can be set in both horizontal and
vertical directions by software.
The display position in the horizontal direction can be selected for all
blocks in common from 256-step display positions in units of 4 TOSC
(TOSC = OSD oscillation cycle).
The display position in the vertical direction for each block can be
selected from 1024-step display positions in units of 1 TH ( TH = HSYNC
cycle).
Blocks are displayed in conformance with the following rules:
When the display position is overlapped with another block
(Figure 59, (b)), a lower block number (1 to 12) is displayed on
the front.
When another block display position appears while one block is
displayed (Figure 59 (c)), the block with a larger set value as the
vertical display start position is displayed. However, do not dis-
play block with the dot size of 2TC ! 2H or 3TC ! 3H during dis-
play period ( V ) of another block.
V In the case of OSD mode block: 20 dots in vertical from the verti-
cal display start position.
V In the case of CC or EXOSD mode block: 26 dots in vertical from
the vertical display start position.
Fig. 59. Display Position
(HR)
VP12, VP22
Block 1
Block 2
(a) Example when each block is separated
VP13, VP23
Block 3
(HR)
VP11, VP12 = VP21, VP22
Block 1
(b) Example when block 2 overlaps with block 1
(Block 2 is not displayed)
(HR)
VP11, VP21
VP12, VP22
(c) Example when block 2 overlaps in process of block 1
Block 1
Block 2
Note: VP1i or VP2i (i : 1 to 12) indicates the vertical display start position of display block i.
VP11, VP21
相关PDF资料
PDF描述
M37373M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
M37409M2-XXXFP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M37413E6HXXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP80
M37413M4-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
M37420M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
相关代理商/技术参数
参数描述
M37276MF248SP 制造商:MITSUBISHI 功能描述:*
M37276MF2575P 制造商:MITSUBISHI 功能描述:*
M37276MF260SP 制造商:MITSUBISHI 功能描述:*
M37276MF300SP 制造商:MITSUBISHI 功能描述:*
M37276MF301SP 制造商:MITSUBISHI 功能描述:*