- 您现在的位置：买卖IC网 > PDF目录189259 > NT5SE8M16DS-6K (NANYA TECHNOLOGY CORP) 8M X 16 SYNCHRONOUS DRAM, 5 ns, PDSO54 PDF资料下载
参数资料
| 型号： | NT5SE8M16DS-6K |
| 厂商： | NANYA TECHNOLOGY CORP |
| 元件分类： | DRAM |
| 英文描述： | 8M X 16 SYNCHRONOUS DRAM, 5 ns, PDSO54 |
| 封装： | 0.400 INCH, LEAD FREE, PLASTIC, TSOP2-54 |
| 文件页数： | 18/64页 |
| 文件大小： | 1153K |
| 代理商： | NT5SE8M16DS-6K |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
NT5SV8M16DS / NT5SV8M16DT
NT5SE8M16DS / NT5SE8M16DT
128Mb Synchronous DRAM
REV 1.0
May 9, 2005
25
NANYA TECHNOLOGY CORPORATION
NANYA reserves the right to change products and specifications without notice.
Automatic Refresh Command (CAS before RAS Refresh)
When CS, RAS, and CAS are held low with CKE and WE high at the rising edge of the clock, the chip enters the Automatic
Refresh mode (CBR). All banks of the SDRAM must be precharged and idle for a minimum of the Precharge time (tRP) before
the Auto Refresh Command (CBR) can be applied. An address counter, internal to the device provides the address during the
refresh cycle. No control of the external address pins is required once this cycle has started.
When the refresh cycle has completed, all banks of the SDRAM will be in the precharged (idle) state. A delay between the Auto
Refresh Command (CBR) and the next Activate Command or subsequent Auto Refresh Command must be greater than or
equal to the RAS cycle time (tRC).
Self Refresh Command
The SDRAM device has a built-in timer to accommodate Self Refresh operation. The Self Refresh Command is defined by hav-
ing CS, RAS, CAS, and CKE held low with WE high at the rising edge of the clock. All banks must be idle prior to issuing the
Self Refresh Command. Once the command is registered, CKE must be held low to keep the device in Self Refresh mode.
When the SDRAM has entered Self Refresh mode all of the external control signals, except CKE, are disabled. The clock is
internally disabled during Self Refresh Operation to save power. The user may halt the external clock while the device is in Self
Refresh mode, however, the clock must be restarted before the device can exit Self Refresh operation. Once the clock is
cycling, the device will exit Self Refresh operation after CKE is returned high. A minimum delay time is required when the device
exits Self Refresh Operation and before the next command can be issued. This delay is equal to the RAS cycle time (tRC) plus
the Self Refresh exit time (tSREX).
相关PDF资料 |
PDF描述 |
|---|---|
| NT5SV8M8DT-7 | 8M X 8 SYNCHRONOUS DRAM, 5.4 ns, PDSO54 |
| NTC1111-20MHZ | Analog IC |
| NTC1111-SERIES | Analog IC |
| NTC1120-12.8MHZ | Analog IC |
| NTC1120-20MHZ | Analog IC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NT5SV16M16AT | 制造商:未知厂家 制造商全称:未知厂家 功能描述:256Mb Synchronous DRAM |
| NT5SV16M16AT-75B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:256Mb Synchronous DRAM |
| NT5SV16M16AT-75BL | 制造商:未知厂家 制造商全称:未知厂家 功能描述:256Mb Synchronous DRAM |
| NT5SV16M16AT-7K | 制造商:未知厂家 制造商全称:未知厂家 功能描述:256Mb Synchronous DRAM |
| NT5SV16M16AT-7KL | 制造商:未知厂家 制造商全称:未知厂家 功能描述:256Mb Synchronous DRAM |
发布紧急采购，3分钟左右您将得到回复。