参数资料
| 型号： | ADV7184BSTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 38/112页 |
| 文件大小： | 0K |
| 描述： | IC DECODER VID SDTV MULTI 80LQFP |
| 标准包装： | 1 |
| 类型： | 视频解码器 |
| 应用： | 投影仪，录音机，安全 |
| 电压 - 电源，模拟： | 3.15 V ~ 3.45 V |
| 电压 - 电源，数字： | 1.65 V ~ 2 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 80-LQFP |
| 供应商设备封装： | 80-LQFP（14x14） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页当前第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页
ADV7184
Rev. A | Page 31 of 112
DCT [1:0], Digital Clamp Timing, Address 0x15 [6:5]
The clamp timing register determines the time constant of the
digital fine-current clamp circuitry. It is important to realize
that the digital fine-current clamp reacts quickly, correcting any
residual dc level error for the active line immediately. Therefore,
the time constant of the digital fine clamp must be much
quicker than the one for the analog blocks.
By default, the time constant of the digital fine-current clamp is
adjusted dynamically to suit the currently connected input signal.
Table 35. DCT [1:0] Function
DCT [1:0]
Description
00 (default)
Slow (TC = 1 sec)
01
Medium (TC = 0.5 sec)
10
Fast (TC = 0.1 sec)
11
TC determined by the input video parameters
DCFE, Digital Clamp Freeze Enable, Address 0x15 [4]
This register bit allows the user to freeze the digital clamp loop
at any time. It is intended for users who do their own clamping.
Users should disable the current sources for analog clamping
via the appropriate register bits, wait until the digital clamp loop
settles, and then freeze it via the DCFE bit.
0 (default)—The digital clamp is operational.
1—The digital clamp loop is frozen.
LUMA FILTER
Data from the digital fine-clamp block is processed by three sets
of filters. The data format at this point is CVBS for CVBS input
format or luma only for Y/C and YPrPb input formats.
Luma Antialias (YAA) Filter. The ADV7184 receives video
at a rate of 27 MHz. (For 4× oversampled video, the ADCs
are sampled at 54 MHz, and the first decimation is performed
inside the DPP filters. Therefore, the data rate into the
ADV7184 is always 27 MHz.) The ITU-R BT.601 standard
recommends a sampling frequency of 13.5 MHz. The luma
antialias filter decimates the oversampled video using a
high quality linear phase, low-pass filter that preserves the
luma signal and simultaneously attenuates out-of-band
components. The luma antialias filter has a fixed response.
Luma-Shaping (YSH) Filters. The shaping filter block is a
programmable low-pass filter with a wide variety of re-
sponses. It can be used to selectively reduce the luma video
signal bandwidth (needed prior to scaling, for example).
For some video sources that contain high frequency noise,
reducing the bandwidth of the luma signal improves visual
picture quality. A follow-on video compression stage may
work more efficiently if the video is low-pass filtered.
The ADV7184 has two responses for the shaping filter: one
that is used for good quality composite, component, and
S-video type sources, and a second for nonstandard composite
signals. The YSH filter responses also include a set of notches
for PAL and NTSC. However, it is recommended to use the
comb filters for Y/C separation.
Digital Resampling Filter. This block allows dynamic
resampling of the video signal to alter parameters such as
the time base of a line of video. Fundamentally, the resampler
is a set of low-pass filters. The actual response is chosen by
the system without requiring user intervention.
filters. Unless otherwise noted, the filters are set in a typical
wideband mode.
Y-Shaping Filter
For input signals in CVBS format, the luma-shaping filters play
an essential role in removing the chroma component from a
composite signal. Y/C separation must aim for best possible
crosstalk reduction while retaining as much bandwidth
(especially on the luma component) as possible. High quality
Y/C separation can be achieved by using the internal comb
filters of the ADV7184. Comb filtering, however, relies on the
frequency relationship of the luma component (multiples of the
video line rate) and the color subcarrier (FSC). For good quality
CVBS signals, this relationship is known and therefore the
comb filter algorithms can be used to separate luma and
chroma with high accuracy.
For nonstandard video signals, the frequency relationship may
have an offset, and the comb filters may not be able to remove
all crosstalk artifacts in an optimum fashion without the
assistance of a shaping filter.
An automatic mode is provided. In this mode, the ADV7184
evaluates the quality of the incoming video signal and selects
the filter responses in accordance with the signal quality and
video standard. YFSM, WYSFMOVR, and WYSFM allow the
user to override the automatic decisions manually in part or in full
(see Figure 15).
The luma-shaping filter has three sets of control bits:
YSFM [4:0] (Address 0x17) allow the user to manually
select a shaping filter mode (applied to all video signals) or
to enable an automatic selection (dependent on video
quality and video standard).
WYSFMOVR (Address 0x18) allows the user to override
the automatic WYSFM filter selection and enable manual
selection of the WYSFM filter via WYSFM [4:0].
WYSFM [4:0] (Address 0x18) allow the user to select a
different shaping filter mode for good quality composite
(CVBS), component (YPrPb), and S-video (Y/C) input
signals.
相关PDF资料 |
PDF描述 |
|---|---|
| ADV7188BSTZ | IC DECODER VID MULTIFORM 80LQFP |
| ADV7189BBSTZ | IC VIDEO DECODER SDTV 80-LQFP |
| ADV7194KSTZ | IC ENCODER VIDEO EXT-10 80-LQFP |
| ADV7202KSTZ | IC CODEC VIDEO 10BIT 64LQFP |
| ADV7311KST | IC VID ENC 6-12BIT DAC'S 64LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADV7185 | 制造商:AD 制造商全称:Analog Devices 功能描述:Professional NTSC/PAL Video Decoder with 10-Bit CCIR656 Output |
| ADV7185KST | 制造商:AD 制造商全称:Analog Devices 功能描述:Professional NTSC/PAL Video Decoder with 10-Bit CCIR656 Output |
| ADV7186 | 制造商:AD 制造商全称:Analog Devices 功能描述:Video Decoder and Display Processor |
| ADV7186BBCZ | 功能描述:IC VIDEO DECODER 196CSPBGA RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| ADV7186BBCZ-RL | 功能描述:IC VIDEO DECODER 196CSPBGA RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
发布紧急采购，3分钟左右您将得到回复。