- 您现在的位置：买卖IC网 > PDF目录98007 > M37902FCCHP 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100 PDF资料下载
参数资料
| 型号： | M37902FCCHP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100 |
| 封装： | 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100 |
| 文件页数： | 114/143页 |
| 文件大小： | 1148K |
| 代理商： | M37902FCCHP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页当前第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页第143页
M37902FCCHP, M37902FGCHP, M37902FJCHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
72
Fig. 73 Transmit timing example when 8-bit asynchronous communication with parity and 1 stop bit selected
Fig. 74 Transmit timing example when 9-bit asynchronous communication with no parity and 2 stop bits selected
ASYNCHRONOUS
SERIAL COMMUNICATION
Asynchronous serial communication can be performed using 7-, 8-, or
9-bit length data. The operation is the same for all data lengths. The
following is the description for 8-bit asynchronous communication.
With 8-bit asynchronous communication, bit 0 of UARTi transmit/re-
ceive mode register is “1”, bit 1 is “0”, and bit 2 is “1”.
Bit 3 is used to select an internal clock or an external clock. If bit 3 is
“0”, an internal clock is selected and if bit 3 is “1”, then external clock
is selected. If an internal clock is selected, bit 0 (CS0) and bit 1 (CS1)
of UARTi transmit/receive control register 0 are used to select the
clock source. When an internal clock is selected for asynchronous
serial communication, the CLKi pin can be used as a normal I/O pin.
The selected internal or external clock is divided by (n+1), then by
16, and is passed through a control circuit to create the UART trans-
mission clock or UART receive clock.
Therefore, the transmission speed can be changed by changing the
contents (n) of the bit rate generator. If the selected clock is an inter-
nal clock Pfi or an external clock fEXT,
Bit Rate = (fi or fEXT) / {(n+1)
×16}
Bit 4 is the stop bit length select bit to select 1 stop bit or 2 stop bits.
Bit 5 is a select bit of odd parity or even parity.
In the odd parity mode, the parity bit is adjusted so that the sum of 1s
in the data and parity bit is always odd.
In the even parity mode, the parity bit is adjusted so that the sum of
the 1s in the data and parity bit is always even.
Bit 6 is the parity bit select bit which indicates whether to add parity
bit or not.
Bits 4 to 6 must be set or reset according to the data format used in
the communicating devices.
Bit 7 is the sleep select bit. The sleep mode is described later.
Figure 76 shows the bit configuration of the serial I/O pin control reg-
________ ________
ister. By bits 0 and 1 of the serial I/O pin control register (CTSi/RTSi
_______ _______
separate select bits), the function of the CTS/RTS pin can be sepa-
rated into two functions, and each function can be assigned to two
different pins. When bits 0 and 1 = “11”, the above separation is per-
formed. When bits 0 and 1 = “00”, no separation is performed.
_______ _______
Table 13 lists the selection methods of the CTS/RTS function.
(1/fi or 1/fEXT)
× (n + 1) × 16
Written in transmit buffer register
Transmission clock
TEi
TIi
CTSi
TENDi
TXDi
TXEPTYi
D0 D1
ST
Start bit
Parity bit Stop bit
D2 D3 D4 D5 D6 D7
PSP ST D0 D1 D2 D3 D4 D5 D6 D7
PSP
ST D0 D1
Transmit register
← Transmit
buffer register
Stopped because TEi = “0”
(1/fi or 1/fEXT)
× (n + 1) × 16
Written in transmit buffer register
Transmission clock
TEi
TIi
TENDi
TXDi
TXEPTYi
D0 D1
ST
D2 D3 D4 D5 D6 D7 D8
SP
ST D0 D1 D2 D3 D4 D5 D6 D7 D8 SP SP
ST D0
D2
D1
Transmit register
← Transmit
buffer register
Stopped because TEi = “0”
Start bit
Stop bit
相关PDF资料 |
PDF描述 |
|---|---|
| M37902FGCHP | 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100 |
| M37906F8CSP | 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42 |
| M37906F8CFP | 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO42 |
| M37906F8CSP | 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42 |
| M37920S4CGP | 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37902FGCGP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37902FGCHP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37902FJCHP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37903S4CHP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37905F8CFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。