参数资料
型号: M37902FCCHP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 140/143页
文件大小: 1148K
代理商: M37902FCCHP
M37902FCCHP, M37902FGCHP, M37902FJCHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
96
Fig. 101 Bit configuration of particular function select register 1
Fig. 102 Bit configuration of watchdog timer frequency select register
7
6
543
2
1
0
Particular function select register 1
STP-instruction-execution status bit (Note 1)
0: Normal operation.
1: STP instruction has been executed.
WIT-instruction-execution status bit (Note 1)
0: Normal operation.
1: WIT instruction has been executed.
Standby state select bit
0: External bus
1: Programmable I/O port
System clock stop select bit at WIT (Note 2)
0: In wait mode, system clock fsys is active.
1: In wait mode, system clock fsys is stopped.
Address output select bit
0: Address changes depending on bus access.
1: Address changes only at access to external address.
Timer B2 clock source select bit
In event counter mode:
0: Clock input from pin TB2IN is counted.
1: fX32 (f(XIN)/32) is counted.
Address
6316
Notes 1: At power-on reset, this bit becomes “0”. At hardware reset or software reset, this bit
retains the value just before reset. Even when “1” is written, the bit status will not change.
2: Setting this bit to “1” must be performed just before execution of the WIT instruction.
Also, after the wait state is terminated, this bit must be cleared to “0” immediately.
76543210
Watchdog timer frequency select register
Watchdog timer frequency select bit
0 : Select W f512
1 : Select W f32
Watchdog timer clock source select bits at STP termination
0 0 : fX32
0 1 : fX16
1 0 : fX128
1 1 : fX64
76543210
Address
6116
down with one of the above divide clocks, fX16 to fX128, after the os-
cillation circuit and PLL circuit have been restarted their operations
owing to an interrupt. The most significant bit of the watchdog timer
reaching “0”, supply of
φBIU and φCPU restarts.
On the other hand, when the external clock input select bit = “1 ” and
the system clock select bit = “0”, supply of
φBIU and φCPU will restart
immediately after the oscillation circuit has been restarted their op-
erations owing to an interrupt. (In actual fact, after the selected one
of the above divide clocks, fX16 to fX128, has been changed from “H”
to “L”, this supply will restart.)
相关PDF资料
PDF描述
M37902FGCHP 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
M37906F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42
M37906F8CFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO42
M37906F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42
M37920S4CGP 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M37902FGCGP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37902FGCHP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37902FJCHP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37903S4CHP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37905F8CFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER