参数资料
型号: M37902FCCHP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 4/143页
文件大小: 1148K
代理商: M37902FCCHP
101
M37902FCCHP, M37902FGCHP, M37902FJCHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
Notes 1: In the flash memory mode, the read/programming/erase
operation cannot be performed for areas except for the
internal flash memory area.
2: The boot ROM area can be reprogrammed only in the
flash memory parallel I/O mode. When the boot ROM
area is read out by the CPU, these addresses are shifted
to addresses 00C00016–00FFFF16 (byte addresses).
3: The reserved area for the serial programmer is assigned
to addresses FFB016–FFBF16 (byte addresses). When
the flash memory serial I/O mode is used, do not
program to this area.
16 Kbytes
001FFF16
Boot ROM area
User ROM area
32 Kbytes
2 Kbytes
8 Kbytes
01FFFF16
003FFF16
005FFF16
00600016
007FFF16
00FFFF16
01000016
00800016
00FFFF16
001FFF16
002FFF16
00300016
003FFF16
007FFF16
00800016
00400016
00380016
00400016
001C0016
00200016
Byte Address
Word Address
00000016
003FFF16
00000016
Byte Addresses
Word Addresses
64 Kbytes
Total 498 Kbytes
64 Kbytes
02FFFF16
02000016
017FFF16
01000016
03FFFF16
03000016
01FFFF16
01800016
64 Kbytes
04FFFF16
04000016
027FFF16
02000016
64 Kbytes
05FFFF16
05000016
02FFFF16
02800016
64 Kbytes
06FFFF16
06000016
037FFF16
03000016
64 Kbytes
07FFFF16
07000016
03FFFF16
03800016
FLASH MEMORY MODE
These microcomputers contain the DINOR (DIvided bit line NOR)-
type flash memory; and single-power-supply reprogramming is avail-
able to this. These microcomputers have the following three modes,
enabling reading/programming/erasure for the flash memory:
Flash memory parallel I/O mode and Flash memory serial I/O
mode, where the flash memory is handled by using an external pro-
grammer.
CPU reprogramming mode, where the flash memory is handled by
the central processing unit (CPU).
As shown in Figures 106 to 108, the flash memory is divided into
several blocks, and erasure per block is possible.
Each of these blocks is provided with a lock bit, which determines the
validity of erasure/program execution. Therefore, data protection per
Fig 106. M37902FJCHP: block configuration of internal flash memory
block is possible.
This internal flash memory has the boot ROM area storing the repro-
gramming control software for reprogramming in the CPU repro-
gramming mode and flash memory serial I/O mode, as well as the
user ROM area storing a certain control software for the normal op-
eration in the microcomputer mode.
Although our reprogramming control firmware for the flash memory
serial I/O mode has been stored into this boot ROM area on ship-
ment, the user-original reprogramming control software which is
more appropriate for the user’s system is reprogrammable into this
area, instead. Note that the reprogramming for the boot ROM area is
enabled only in the flash memory parallel I/O mode.
相关PDF资料
PDF描述
M37902FGCHP 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
M37906F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42
M37906F8CFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO42
M37906F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42
M37920S4CGP 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M37902FGCGP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37902FGCHP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37902FJCHP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37903S4CHP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37905F8CFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER