参数资料
型号: AD9549ABCPZ-REEL7
厂商: Analog Devices Inc
文件页数: 52/76页
文件大小: 0K
描述: IC CLOCK GEN/SYNCHRONIZR 64LFCSP
产品变化通告: AD9549A Mask Change 22/Oct/2010
标准包装: 750
类型: 时钟/频率发生器,同步器
PLL:
主要目的: 以太网,SONET/SDH,Stratum
输入: CMOS,LVDS,LVPECL
输出: CMOS,HSTL
电路数: 1
比率 - 输入:输出: 2:2
差分 - 输入:输出: 是/是
频率 - 最大: 750MHz
电源电压: 1.71 V ~ 3.465 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 64-VFQFN 裸露焊盘,CSP
供应商设备封装: 64-LFCSP-VQ(9x9)
包装: 带卷 (TR)
AD9549
Rev. D | Page 56 of 76
Register 0x0104—S-Divider (DPLL Feedback Divider)
Table 27.
Bits
Bit Name
Description
[7:0]
S-divider
Feedback divider. Divide ratio = 1 65,536. If the desired feedback ratio is greater than 65,536, or if
the feedback signal on FDBK_IN is greater than 400 MHz, then Bit 0 of Register 0x0106 must be set.
Note that the actual S-divider is the value in this register plus 1, so to have an R-divider of 1,
Register 0x0104 and Register 0x0105 must both be 0x00. Register 0x0104 is the least significant byte.
Register 0x0105—S-Divider (DPLL Feedback Divider) (Continued)
Table 28.
Bits
Bit Name
Description
[15:8]
S-divider
Feedback divider. Divide ratio = 1 65,536. If the desired feedback ratio is greater than 65,536, or if
the feedback signal on FDBK_IN is greater than 400 MHz, then Bit 0 of Register 0x0106 must be set.
Note that the actual S-divider is the value in this register plus 1, so to have an R-divider of 1,
Register 0x0104 and Register 0x0105 must both be 0x00. Register 0x0104 is the least significant byte.
Register 0x0106—S-Divider (DPLL Feedback Divider) (Continued)
Table 29.
Bits
Bit Name
Description
7
Falling edge triggered
Setting this bit inverts the reference clock before S-divider.
[6:1]
Reserved
Reserved.
0
S-divider/2
Setting this bit enables an additional /2 prescaler. See the Feedback Divider (Divide-by-S) section.
If the desired feedback ratio is greater than 65,536, or if the feedback signal on FDBK_IN is greater
than 400 MHz, then this bit must be set. An example of this case is when the PLL is locking to an
image of the DAC output that is above the Nyquist frequency.
Register 0x0107—P-Divider
Table 30.
Bits
Bit Name
Description
[4:0]
P-divider
Divide ratio. Controls the ratio of DAC sample rate to loop filter sample rate. See the Digital Loop
Filter section. Loop filter sample rate = DAC sample rate/2^(divide ratio[4:0]). For the default case
of 1 GHz DAC sample rate, and P-divider[4:0] of 5, the loop filter sample rate is 31.25 MHz. Note that
the DAC sample rate is the same as system clock.
Register 0x0108—Loop Coefficients
See the Digital Loop Filter Coefficients section. Note that the AD9549 evaluation software derives these values.
Table 31.
Bits
Bit Name
Description
[7:0]
Alpha-0
Linear coefficient for alpha coefficient.
Register 0x0109—Loop Coefficients (Continued)
Table 32.
Bits
Bit Name
Description
[11:8]
Alpha-0
Linear coefficient for alpha coefficient.
相关PDF资料
PDF描述
AD9550BCPZ-REEL7 IC INTEGER-N TRANSLATOR 32-LFCSP
AD9551BCPZ IC CLOCK GEN MULTISERV 40-LFCSP
AD9552BCPZ-REEL7 IC PLL CLOCK GEN LP 32LFCSP
AD9553BCPZ-REEL7 IC INTEGER-N CLCK GEN 32LFCSP
AD9557BCPZ-REEL7 IC CLK XLATR PLL 1250MHZ 40LFCSP
相关代理商/技术参数
参数描述
AD9549APCBZ 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Input Network Clock Generator/Synchronizer
AD9549BCPZ 制造商:Analog Devices 功能描述:
AD9549BCPZ-REEL7 制造商:Analog Devices 功能描述:PLL CLOCK SYNTHESIZER SGL 64LFCSP EP - Tape and Reel
AD9549BCPZ-TR 制造商:Analog Devices 功能描述:650MHZ DDS CLK GEN W/SYNCH REEL - Tape and Reel
AD9549XCPZ 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Input Network Clock Generator/Synchronizer