收藏本站
参数资料
型号： ORT82G5-2BM680
厂商： LATTICE SEMICONDUCTOR CORP
元件分类： FPGA
英文描述： FPGA, 1296 CLBS, 380000 GATES, PBGA680
封装： PLASTIC, BGA-680
文件页数： 61/110页
文件大小： 1459K
代理商： ORT82G5-2BM680
54
Lattice Semiconductor
Data Sheet
January 25, 2002
8b/10b SERDES Backplane Interface FPSC
ORCA ORT82G5 1.0-1.25/2.0-2.5/3.125-3.5 Gbits/s
Memory Map (continued)
Table 18. Memory Map (continued)
Addr
(Hex)
Reg
#
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
Default
Value
SERDES B Common Transmit and Receive Channel Conguration Registers
30104
—
PRBS_BA
Transmit and
Receive PRBS
Enable Bit,
Bank B, Chan-
nel A. When
PRBS = 1, the
PRBS genera-
tor on the trans-
mitter and the
PRBS checker
on the receiver
are enabled.
PRBS = 0 on
device reset.
MASK_BA
Transmit and Receive
Alarm Mask Bit, Bank
B, Channel A. When
MASK = 1, the trans-
mit and receive
alarms of a channel
are prevented from
generating an inter-
rupt. This MASK bit
overrides the individ-
ual alarm mask bits in
the Alarm Mask Reg-
isters. MASK = 1 on
device reset.
SWRST_BA
Transmit and Receive
Software Reset Bit,
Bank B, Channel A.
When SWRST = 1, this
bit provides the same
function as the hard-
ware reset, except all
conguration register
settings are preserved.
This is not a self-clear-
ing bit. Once set, this bit
must be cleared by writ-
ing a 0 to it. SWRST = 0
on device reset.
————
TESTEN_BA
Transmit and Receive Test
Enable Bit, Bank B, Channel A.
When TESTEN = 1, the trans-
mit and receive sections are
placed in test mode. TESTEN
= 0 on device reset. When the
global test enable bit GTES-
TEN = 0, the individual channel
test enable bits are used to
selectively place a channel in
test or normal mode. When
GTESTEN = 1, all channels are
set to test mode regardless of
their TESTEN setting.
40
30114
—
PRBS_BB
Transmit and
Receive PRBS
Enable Bit,
Bank B, Chan-
nel B. When
PRBS = 1, the
PRBS genera-
tor on the trans-
mitter and the
PRBS checker
on the receiver
are enabled.
PRBS = 0 on
device reset.
MASK_BB
Transmit and Receive
Alarm Mask Bit, Bank
B, Channel B. When
MASK = 1, the trans-
mit and receive
alarms of a channel
are prevented from
generating an inter-
rupt. This MASK bit
overrides the individ-
ual alarm mask bits in
the Alarm Mask Reg-
isters. MASK = 1 on
device reset.
SWRST_BB
Transmit and Receive
Software Reset Bit,
Bank B, Channel B.
When SWRST = 1, this
bit provides the same
function as the hard-
ware reset, except all
conguration register
settings are preserved.
This is not a self-clear-
ing bit. Once set, this bit
must be cleared by writ-
ing a 0 to it. SWRST = 0
on device reset.
————
TESTEN_BB
Transmit and Receive Test
Enable Bit, Bank B, Channel B.
When TESTEN = 1, the trans-
mit and receive sections are
placed in test mode. TESTEN
= 0 on device reset. When the
global test enable bit GTES-
TEN = 0, the individual channel
test enable bits are used to
selectively place a channel in
test or normal mode. When
GTESTEN = 1, all channels are
set to test mode regardless of
their TESTEN setting.
40
30124
—
PRBS_BC
Transmit and
Receive PRBS
Enable Bit,
Bank B, Chan-
nel C. When
PRBS = 1, the
PRBS genera-
tor on the trans-
mitter and the
PRBS checker
on the receiver
are enabled.
PRBS = 0 on
device reset.
MASK_BC
Transmit and Receive
Alarm Mask Bit, Bank
B, Channel C. When
MASK = 1, the trans-
mit and receive
alarms of a channel
are prevented from
generating an inter-
rupt. This MASK bit
overrides the individ-
ual alarm mask bits in
the Alarm Mask Reg-
isters. MASK = 1 on
device reset.
SWRST_BC
Transmit and Receive
Software Reset Bit,
Bank B, Channel C.
When SWRST = 1, this
bit provides the same
function as the hard-
ware reset, except all
conguration register
settings are preserved.
This is not a self-clear-
ing bit. Once set, this bit
must be cleared by writ-
ing a 0 to it. SWRST = 0
on device reset.
————
TESTEN_BC
Transmit and Receive Test
Enable Bit, Bank B, Channel C.
When TESTEN = 1, the trans-
mit and receive sections are
placed in test mode. TESTEN
= 0 on device reset. When the
global test enable bit GTES-
TEN = 0, the individual channel
test enable bits are used to
selectively place a channel in
test or normal mode. When
GTESTEN = 1, all channels are
set to test mode regardless of
their TESTEN setting.
40
30134
—
PRBS_BD
Transmit and
Receive PRBS
Enable Bit,
Bank B, Chan-
nel D. When
PRBS = 1, the
PRBS genera-
tor on the trans-
mitter and the
PRBS checker
on the receiver
are enabled.
PRBS = 0 on
device reset.
MASK_BD
Transmit and Receive
Alarm Mask Bit, Bank
B, Channel D. When
MASK = 1, the trans-
mit and receive
alarms of a channel
are prevented from
generating an inter-
rupt. This MASK bit
overrides the individ-
ual alarm mask bits in
the Alarm Mask Reg-
isters. MASK = 1 on
device reset.
SWRST_BD
Transmit and Receive
Software Reset Bit,
Bank B, Channel D.
When SWRST = 1, this
bit provides the same
function as the hard-
ware reset, except all
conguration register
settings are preserved.
This is not a self-clear-
ing bit. Once set, this bit
must be cleared by writ-
ing a 0 to it. SWRST = 0
on device reset.
————
TESTEN_BD
Transmit and Receive Test
Enable Bit, Bank B, Channel D.
When TESTEN = 1, the trans-
mit and receive sections are
placed in test mode. TESTEN
= 0 on device reset. When the
global test enable bit GTES-
TEN = 0, the individual channel
test enable bits are used to
selectively place a channel in
test or normal mode. When
GTESTEN = 1, all channels are
set to test mode regardless of
their TESTEN setting.
40
相关PDF资料
PDF描述
ORT82G5-3BM680 FPGA, 1296 CLBS, 380000 GATES, PBGA680
OS10040280G-012 FIBER OPTIC RECEIVER, 1290-1600nm, PANEL MOUNT, FC/APC CONNECTOR
OT-WBSC-Y-A-10-X-9-M-3-05-FA FIBER OPTIC SPLITTER/COUPLER, 1X2PORT, 10.0, PANEL MOUNT, FC/APC CONNECTOR
OT-WBSC-Y-A-50-13-9-F-1-05-FA FIBER OPTIC SPLITTER/COUPLER, 1X2PORT, 50.0, PANEL MOUNT, FC/APC CONNECTOR
OT-WBSC-Y-A-50-X-9-O-1-99-SA FIBER OPTIC SPLITTER/COUPLER, 1X2PORT, 50.0, PANEL MOUNT, SC/APC CONNECTOR
相关代理商/技术参数
参数描述
ORT82G5-2BM680C 功能描述:FPGA - 现场可编程门阵列 10368 LUT 372 I/O RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-2BM680I 功能描述:FPGA - 现场可编程门阵列 10368 LUT 372 I/O RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-2F680C 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 2.7Gbits/s BP XCVR 643K RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-2F680I 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 2.7GBITS/s BP XCVR 643K RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-2FN680C 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 1.5V 3.7 G b Bpln Xcvr 643K Gt RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*