参数资料
型号: LFE3-35EA-6FN484C
厂商: LATTICE SEMICONDUCTOR CORP
元件分类: FPGA
中文描述: FPGA, PBGA484
封装: 23 X 23 MM, LEAD FREE, FPBGA-484
文件页数: 61/130页
文件大小: 2667K
代理商: LFE3-35EA-6FN484C
2-33
Architecture
Lattice Semiconductor
LatticeECP3 Family Data Sheet
Input signals are fed from the sysI/O buffer to the input register block (as signal DI). If desired, the input signal can
bypass the register and delay elements and be used directly as a combinatorial signal (INDD), a clock (INCK) and,
in selected blocks, the input to the DQS delay block. If an input delay is desired, designers can select either a fixed
delay or a dynamic delay DEL[3:0]. The delay, if selected, reduces input register hold time requirements when
using a global clock.
The input block allows three modes of operation. In single data rate (SDR) the data is registered with the system
clock by one of the registers in the single data rate sync register block.
In DDR mode, two registers are used to sample the data on the positive and negative edges of the modified DQS
(ECLKDQSR) in the DDR Memory mode or ECLK signal when using DDR Generic mode, creating two data
streams. Before entering the core, these two data streams are synchronized to the system clock to generate two
data streams.
A gearbox function can be implemented in each of the input registers on the left and right sides. The gearbox func-
tion takes a double data rate signal applied to PIOA and converts it as four data streams, INA, IPA, INB and IPB.
The two data streams from the first set of DDR registers are synchronized to the edge clock and then to the system
clock before entering the core. Figure 2-30 provides further information on the use of the gearbox function.
The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures ade-
quate timing when data is transferred to the system clock domain from the ECLKDQSR (DDR Memory Interface
mode) or ECLK (DDR Generic mode). The DDRLAT signal is used to ensure the data transfer from the synchroni-
zation registers to the clock transfer and gearbox registers.
The ECLKDQSR, DDRCLKPOL and DDRLAT signals are generated in the DQS Read Control Logic Block. See
Figure 2-37 for an overview of the DQS read control logic.
Further discussion about using the DQS strobe in this module is discussed in the DDR Memory section of this data
sheet.
Please see TN1180, LatticeECP3 High-Speed I/O Interface for more information on this topic.
相关PDF资料
PDF描述
LFEC10E-5FN256C
LFXTAL015822 QUARTZ CRYSTAL RESONATOR, 0.032768 MHz
LFXTAL033073BULK QUARTZ CRYSTAL RESONATOR, 22.1184 MHz
LGK2308-0301F 2.5 MM AUDIO CONNECTOR, JACK
LGP1331 6.3V, DC POWER PLUG OR JACK
相关代理商/技术参数
参数描述
LFE3-35EA-6FN484I 功能描述:FPGA - 现场可编程门阵列 33.3K LUTs 295 I/O 1.2V -6 Speed IND RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
LFE3-35EA-6FN672C 功能描述:FPGA - 现场可编程门阵列 33.3K LUTs 310 I/O 1.2V -6 Speed RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
LFE3-35EA-6FN672I 功能描述:FPGA - 现场可编程门阵列 33.3K LUTs 310 I/O 1.2V -6 Speed IND RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
LFE3-35EA-6FTN256C 功能描述:FPGA - 现场可编程门阵列 33.3K LUTs 133 I/O 1.2V -6 Speed RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
LFE3-35EA-6FTN256I 功能描述:FPGA - 现场可编程门阵列 33.3K LUTs 133 I/O 1.2V -6 Speed IND RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256