参数资料
型号: RB80526PZ667256
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 64-BIT, 667 MHz, MICROPROCESSOR, CPGA370
封装: FCPGA-370
文件页数: 62/74页
文件大小: 502K
代理商: RB80526PZ667256
Datasheet
65
Pentium III Processor for the PGA370 Socket up to 750 MHz
BERR#
I/O
The BERR# (Bus Error) signal is asserted to indicate an unrecoverable error
without a bus protocol violation. It may be driven by all processor system bus
agents, and must connect the appropriate pins of all such agents, if used. However,
Pentium III processors do not observe assertions of the BERR# signal.
BERR# assertion conditions are configurable at a system level. Assertion options
are defined by the following options:
Enabled or disabled.
Asserted optionally for internal errors along with IERR#.
Asserted optionally by the request initiator of a bus transaction after it observes an
error.
Asserted by any bus agent when it observes an error in a bus transaction.
BINIT#
I/O
The BINIT# (Bus Initialization) signal may be observed and driven by all processor
system bus agents, and if used must connect the appropriate pins of all such
agents. If the BINIT# driver is enabled during power on configuration, BINIT# is
asserted to signal any bus condition that prevents reliable future information.
If BINIT# observation is enabled during power-on configuration, and BINIT# is
sampled asserted, all bus state machines are reset and any data which was in
transit is lost. All agents reset their rotating ID for bus arbitration to the state after
Reset, and internal count information is lost. The L1 and L2 caches are not
affected.
If BINIT# observation is disabled during power-on configuration, a central agent
may handle an assertion of BINIT# as appropriate to the error handling architecture
of the system.
BNR#
I/O
The BNR# (Block Next Request) signal is used to assert a bus stall by any bus
agent who is unable to accept new bus transactions. During a bus stall, the current
bus owner cannot issue any new transactions.
Since multiple agents might need to request a bus stall at the same time, BNR# is a
wire-OR signal which must connect the appropriate pins of all processor system
bus agents. In order to avoid wire-OR glitches associated with simultaneous edge
transitions driven by multiple drivers, BNR# is activated on specific clock edges and
sampled on specific clock edges.
BP[3:2]#
I/O
The BP[3:2]# (Breakpoint) signals are outputs from the processor that indicate the
status of breakpoints.
BPM[1:0]#
I/O
The BPM[1:0]# (Breakpoint Monitor) signals are breakpoint and performance
monitor signals. They are outputs from the processor which indicate the status of
breakpoints and programmable counters used for monitoring processor
performance.
BPRI#
I
The BPRI# (Bus Priority Request) signal is used to arbitrate for ownership of the
processor system bus. It must connect the appropriate pins of all processor system
bus agents. Observing BPRI# active (as asserted by the priority agent) causes all
other agents to stop issuing new requests, unless such requests are part of an
ongoing locked operation. The priority agent keeps BPRI# asserted until all of its
requests are completed, then releases the bus by deasserting BPRI#.
Table 33. Signal Description (Sheet 2 of 8)
Name
Type
Description
相关PDF资料
PDF描述
RB80526RY001128 32-BIT, 1000 MHz, MICROPROCESSOR, CPGA370
RB80526RX766128 32-BIT, 766 MHz, MICROPROCESSOR, CPGA370
RC5C317B REAL TIME CLOCK, PDSO14
RC7102 133.3 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48
RC7108 150 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48
相关代理商/技术参数
参数描述
RB80526PZ733256 制造商:Rochester Electronics LLC 功能描述:PIII 733/133 256K ON DIE FC-PGA - Bulk
RB80526PZ733256S L4CG 制造商:Intel 功能描述:MPU Pentium 制造商:Intel 功能描述:MPU Pentium? III Processor 0.18um 733MHz 370-Pin FCPGA
RB80526PZ733256S L4ZL 制造商:Intel 功能描述:MPU Pentium 制造商:Intel 功能描述:MPU Pentium? III Processor 0.18um 733MHz 370-Pin FCPGA
RB80526PZ800256 制造商:Rochester Electronics LLC 功能描述:PIII 800/133 256K ON DIE FC-PGA - Bulk
RB80526PZ866256 制造商:Rochester Electronics LLC 功能描述:PIII 866/133 256K ON DIE FC-PGA - Bulk