参数资料
型号: DS3112+W
厂商: Maxim Integrated Products
文件页数: 124/133页
文件大小: 0K
描述: IC MUX T3/E3 3.3V 256-PBGA
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 40
控制器类型: 调帧器,多路复用器
接口: 并行/串行
电源电压: 3.135 V ~ 3.465 V
电流 - 电源: 150mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 256-LBGA
供应商设备封装: 256-PBGA(27x27)
包装: 管件
DS3112
90 of 133
Register Name:
RHDLC
Register Description:
Receive HDLC FIFO
Register Address:
82h
Bit #
7
6
5
4
3
2
1
0
Name
D7
D6
D5
D4
D3
D2
D1
D0
Default
Bit #
15
14
13
12
11
10
9
8
Name
PS1
PS0
CBYTE
OBYTE
Default
Note 1: When the CPU bus is operated in the 8-bit mode (CMS = 1), the host should always read the lower byte (bits 0 to 7) first followed by
the upper byte (bits 8 to 15). Bits that are underlined are read-only; all other bits are read-write.
Note 2: Packets with three or fewer bytes (including the CRC FCS) in between flags are invalid and the data that appears in the FIFO in
such instances is meaningless. If only one byte is received between flags, then both the CBYTE and OBYTE bits will be set. If two bytes are
received, then OBYTE will be set for the first one received and CBYTE will be set for the second byte received. If three bytes are received,
then OBYTE will be set for the first one received and CBYTE will be set for the third byte received. In all of these cases, the packet status
will be reported as PS0 = 0/PS1 = 1 and the data in the FIFO should be ignored.
Bits 0 to 7: Receive FIFO Data (D0 to D7). Data from the Receive FIFO can be read from these bits. D0 is the
LSB and is received first while D7 is the MSB and is received last.
Bit 8: Opening Byte (OBYTE). This bit will be set to a one when the byte available at the D0 to D7 bits from the
Receive FIFO is the first byte of a HDLC packet.
Bit 9: Closing Byte (CBYTE). This bit will be set to a one when the byte available at the D0 to D7 bits from the
Receive FIFO is the last byte of a HDLC packet whether the packet is valid or not. The host can use the PS0 and
PS1 bits to determine if the packet is valid or not.
Bits 10 and 11: Packet Status Bits 0 and 1 (PS0 and PS1). These bits are only valid when the CBYTE bit is set
to a one. These bits inform the host of the validity of the incoming packet and the cause of the problem if the
packet was received in error.
PS1
PS0
PACKET
STATUS
REASON FOR INVALID RECEPTION OF THE PACKET
0
Valid
0
1
Invalid
Corrupt CRC
1
0
Invalid
Incoming packet was either too short (three or fewer bytes including the CRC) or
did not contain an integral number of octets
1
Invalid
Abort sequence detected
相关PDF资料
PDF描述
CONREVSMA007-R58 CONN RP-SMA MALE END CRIMP RG-58
DS26401NA2+ IC OCTAL FRAMER T1/E1/J1 256BGA
VI-24L-IX-S CONVERTER MOD DC/DC 28V 75W
DS26401+ IC OCTAL FRAMER T1/E1/J1 256BGA
PIC16LF1938-E/SS MCU 8BIT 16K FLASH 28SSOP
相关代理商/技术参数
参数描述
DS3116MP000 制造商:Thomas & Betts 功能描述:MAXGARD - RR8F
DS311X 功能描述:KWIK-CHG DESIGNATION STRIPS DBL RoHS:是 类别:盒,外壳,支架 >> 插线台,插座面板 - 配件 系列:Kwik-Change® 标准包装:50 系列:- 附件类型:模拟插头,双 样式:耳机,0.173" 直径 包括:-
DS312 功能描述:插线板 DESIGN STRIP COVER RoHS:否 制造商:Switchcraft 产品类型:Bantam (TT) 正规化: 高度/机架数量: 深度: 端接类型: 位置/触点数量:48
DS-312 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Four-Way Power Divider, 10 - 500 MHz
DS312_09 制造商:XILINX 制造商全称:XILINX 功能描述:Spartan-3E FPGA Family: Introduction and Ordering Information