参数资料
型号: DS3112+W
厂商: Maxim Integrated Products
文件页数: 55/133页
文件大小: 0K
描述: IC MUX T3/E3 3.3V 256-PBGA
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 40
控制器类型: 调帧器,多路复用器
接口: 并行/串行
电源电压: 3.135 V ~ 3.465 V
电流 - 电源: 150mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 256-LBGA
供应商设备封装: 256-PBGA(27x27)
包装: 管件
DS3112
28 of 133
2.7 High-Speed (T3 or E3) Receive Port Signal Description
Signal Name:
HRPOS/HRNEG
Signal Description:
High-Speed (T3 or E3) Receive Serial Data Inputs
Signal Type:
Input
These input signals sample the serial data from the incoming T3 data streams or E3 data streams. Data
can be clocked into the device either on rising edges (normal clock mode) or falling edges (inverted clock
mode) of the associated HRCLK. This option is controlled via the HRCLKI control bit in Master Control
Register 2 (Section 4.2).
Signal Name:
HRCLK
Signal Description:
High-Speed (T3 or E3) Receive Serial Clock Input
Signal Type:
Input
This signal is used to clock data in from the incoming T3 or E3 data streams. The T3 or E3 serial data
streams at the HRPOS and HRNEG signals can be clocked into the device either on rising edges (normal
clock mode) or falling edges (inverted clock mode) of HRCLK. This option is controlled via the HRCLKI
control bit in Master Control Register 2 (Section 4.2).
Note: The HRCLK must be present for the host to be able to obtain status information (except the LOTC
and LORC status bits, see Section 4.3) from the device.
2.8 High-Speed (T3 or E3) Transmit Port Signal Description
Signal Name:
HTPOS/HTNEG
Signal Description:
High-Speed (T3 or E3) Transmit Serial Data Outputs
Signal Type:
Output
These output signals present the outgoing T3 data streams or E3 data streams. Data can be clocked out of
the device either on rising edges (normal clock mode) or falling edges (inverted clock mode) of HTCLK.
This option is controlled via the HTCLKI control bit in Master Control Register 2 (Section 4.2). Also,
these outputs can be forced high or low via the HTDATH and HTDATL control bits respectively in
Master Control Register 2 (Section 4.2).
Signal Name:
HTCLK
Signal Description:
High-Speed (T3 or E3) Transmit Serial Clock Output
Signal Type:
Output
This output signal is used to clock T3 or E3 data out of the device. The T3 or E3 serial data streams at the
HTPOS and HTNEG signals can be clocked out of the device either on rising edges (normal clock mode)
or falling edges (inverted clock mode) of HTCLK. This option is controlled via the HTCLKI control bit
in Master Control Register 2 (Section 4.2).
相关PDF资料
PDF描述
CONREVSMA007-R58 CONN RP-SMA MALE END CRIMP RG-58
DS26401NA2+ IC OCTAL FRAMER T1/E1/J1 256BGA
VI-24L-IX-S CONVERTER MOD DC/DC 28V 75W
DS26401+ IC OCTAL FRAMER T1/E1/J1 256BGA
PIC16LF1938-E/SS MCU 8BIT 16K FLASH 28SSOP
相关代理商/技术参数
参数描述
DS3116MP000 制造商:Thomas & Betts 功能描述:MAXGARD - RR8F
DS311X 功能描述:KWIK-CHG DESIGNATION STRIPS DBL RoHS:是 类别:盒,外壳,支架 >> 插线台,插座面板 - 配件 系列:Kwik-Change® 标准包装:50 系列:- 附件类型:模拟插头,双 样式:耳机,0.173" 直径 包括:-
DS312 功能描述:插线板 DESIGN STRIP COVER RoHS:否 制造商:Switchcraft 产品类型:Bantam (TT) 正规化: 高度/机架数量: 深度: 端接类型: 位置/触点数量:48
DS-312 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Four-Way Power Divider, 10 - 500 MHz
DS312_09 制造商:XILINX 制造商全称:XILINX 功能描述:Spartan-3E FPGA Family: Introduction and Ordering Information