参数资料
型号: DS3112+W
厂商: Maxim Integrated Products
文件页数: 77/133页
文件大小: 0K
描述: IC MUX T3/E3 3.3V 256-PBGA
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 40
控制器类型: 调帧器,多路复用器
接口: 并行/串行
电源电压: 3.135 V ~ 3.465 V
电流 - 电源: 150mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 256-LBGA
供应商设备封装: 256-PBGA(27x27)
包装: 管件
DS3112
48 of 133
5
T3/E3 FRAMER
On the receive side, the T3/E3 framer locates the frame boundaries of the incoming T3 or E3 data stream
and monitors the data stream for alarms and errors. Alarms are detected and reported in T3/E3 Status
Register (T3E3SR) and the T3/E3 Information Register (T3E3INFO), which are described in Section 5.3.
Errors are accumulated in a set of error counters (Section 5.4). The host can force the T3/E3 framer to
resynchronize via the T3E3RSY control bit in the MRID register (Section 4.1). On the transmit side, the
device formats the outgoing data stream with the proper framing pattern and overhead and can generate
alarms. It can also inject errors for diagnostic testing purposes (T3E3EIC register). The transmit side of
the framer is called the “formatter.”
The T3/E3 framer and formatter can be used in conjunction with the multiplexer or as a stand-alone
framer. This selection is made in the Master Configuration 1 (MC1) register (Section 4.2).
5.1 T3/E3 Line Loopback
The line loopback loops the incoming T3/E3 data (the HRCLK, HRPOS, and HRNEG inputs) directly
back to the transmit side (the HTCLK, HTPOS, and HTNEG outputs). When this loopback is enabled, the
incoming receive data continues to pass through the device but the data output from the T3/E3 formatter
is replaced with the data being input to the device. See the block diagrams in Section 1 for a visual
description of this loopback.
5.2 T3/E3 Diagnostic Loopback
The diagnostic loopback loops the outgoing T3/E3 data from the T3/E3 formatter back to receive side
framer. When this loopback is enabled, the incoming receive data at HRCLK, HRPOS, and HRNEG is
ignored. See the block diagrams in Section 1 for a visual description of this loopback. Please note that the
device can still generate AIS at the HTCLK, HTPOS, and HTNEG outputs when this loopback is
invoked. This is important to keep the data that is being looped back from disturbing downstream
equipment.
5.3 T3/E3 Payload Loopback
The payload loopback loops the framed T3/E3 data from the receive side framer back to the transmit side
formatter. When this loopback is enabled, the incoming receive data continues to pass through the device
but the data normally being input to the T3/E3 formatter is ignored. See the block diagrams in Section 1
for a visual description of this loopback.
相关PDF资料
PDF描述
CONREVSMA007-R58 CONN RP-SMA MALE END CRIMP RG-58
DS26401NA2+ IC OCTAL FRAMER T1/E1/J1 256BGA
VI-24L-IX-S CONVERTER MOD DC/DC 28V 75W
DS26401+ IC OCTAL FRAMER T1/E1/J1 256BGA
PIC16LF1938-E/SS MCU 8BIT 16K FLASH 28SSOP
相关代理商/技术参数
参数描述
DS3116MP000 制造商:Thomas & Betts 功能描述:MAXGARD - RR8F
DS311X 功能描述:KWIK-CHG DESIGNATION STRIPS DBL RoHS:是 类别:盒,外壳,支架 >> 插线台,插座面板 - 配件 系列:Kwik-Change® 标准包装:50 系列:- 附件类型:模拟插头,双 样式:耳机,0.173" 直径 包括:-
DS312 功能描述:插线板 DESIGN STRIP COVER RoHS:否 制造商:Switchcraft 产品类型:Bantam (TT) 正规化: 高度/机架数量: 深度: 端接类型: 位置/触点数量:48
DS-312 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Four-Way Power Divider, 10 - 500 MHz
DS312_09 制造商:XILINX 制造商全称:XILINX 功能描述:Spartan-3E FPGA Family: Introduction and Ordering Information