参数资料
型号: AD9520-0BCPZ-REEL7
厂商: Analog Devices Inc
文件页数: 26/80页
文件大小: 0K
描述: IC CLOCK GEN 2.8GHZ VCO 64LFCSP
设计资源: Synchronizing Multiple AD9910 1 GSPS Direct Digital Synthesizers (CN0121)
Phase Coherent FSK Modulator (CN0186)
标准包装: 750
类型: 时钟发生器,扇出配送
PLL:
输入: CMOS,LVDS,LVPECL
输出: CMOS,LVPECL
电路数: 1
比率 - 输入:输出: 2:12,2:24
差分 - 输入:输出: 是/是
频率 - 最大: 2.95GHz
除法器/乘法器: 是/无
电源电压: 3.135 V ~ 3.465 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 64-VFQFN 裸露焊盘,CSP
供应商设备封装: 64-LFCSP-VQ(9x9)
包装: 带卷 (TR)
AD9520-0
Data Sheet
Rev. A | Page 32 of 80
Mode 2—High Frequency Clock Distribution; CLK or
External VCO > 1600 MHz
The AD9520 power-up default configuration has the PLL powered
off and the routing of the input set so that the CLK/ CLK input
is connected to the distribution section through the VCO divider
(divide-by-1/divide-by-2/divide-by-3/divide-by-4/divide-by-5/
divide-by-6). This is a distribution only mode that allows for
an external input up to 2400 MHz (see Table 3). The maximum
frequency that can be applied to the channel dividers is 1600 MHz;
therefore, higher input frequencies must be divided down before
reaching the channel dividers.
When the PLL is enabled, this routing also allows the use of the
PLL with an external VCO or VCXO with a frequency of less than
2400 MHz. In this configuration, the internal VCO is not used and
is powered off. The external VCO/VCXO feeds directly into the
prescaler.
The register settings shown in Table 26 are the default values of
these registers at power-up or after a reset operation.
Table 26. Default Register Settings for Clock Distribution
Mode
Register
Description
0x010[1:0] = 01b
PLL asynchronous power-down (PLL off)
0x1E0[2:0] = 000b
Set VCO divider = 2
0x1E1[0] = 0b
Use the VCO divider
0x1E1[1] = 0b
Select CLK as the source
When the internal PLL is used with an external VCO, the PLL
must be turned on.
Table 27. Settings When Using an External VCO
Register
Description
0x010[1:0] = 00b
PLL normal operation (PLL on)
0x010 to 0x01E
PLL settings; select and enable a reference
input; set R, N (P, A, B), PFD polarity, and ICP
according to the intended loop
configuration
0x1E1[1] = 0b
Select CLK as the source
An external VCO requires an external loop filter that must be
connected between CP and the tuning pin of the VCO. This
loop filter determines the loop bandwidth and stability of the
PLL. Make sure to select the proper PFD polarity for the VCO
being used.
Table 28. Setting the PFD Polarity
Register
Description
0x010[7] = 0b
PFD polarity positive (higher control
voltage produces higher frequency)
0x010[7] = 1b
PFD polarity negative (higher control
voltage produces lower frequency)
相关PDF资料
PDF描述
AD9520-1BCPZ IC CLOCK GEN 2.5GHZ VCO 64LFCSP
AD9520-2BCPZ IC CLOCK GEN 2.2GHZ VCO 64LFCSP
AD9520-3BCPZ-REEL7 IC CLOCK GEN 2GHZ VCO 64LFCSP
AD9520-4BCPZ-REEL7 IC CLOCK GEN 1.6GHZ VCO 64LFCSP
AD9520-5BCPZ-REEL7 IC CLOCK GEN EXT VCO 64LFCSP
相关代理商/技术参数
参数描述
AD9520-1 制造商:AD 制造商全称:Analog Devices 功能描述:12 LVPECL/24 CMOS Output Clock Generator with Integrated 2.5 GHz VCO
AD9520-1/PCBZ 功能描述:BOARD EVAL FOR AD9520-1 RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理,热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板,CD,电源
AD9520-1BCPZ 功能描述:IC CLOCK GEN 2.5GHZ VCO 64LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器,PLL,频率合成器 系列:- 标准包装:2,000 系列:- 类型:PLL 时钟发生器 PLL:带旁路 输入:LVCMOS,LVPECL 输出:LVCMOS 电路数:1 比率 - 输入:输出:2:11 差分 - 输入:输出:是/无 频率 - 最大:240MHz 除法器/乘法器:是/无 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP(7x7) 包装:带卷 (TR)
AD9520-1BCPZ-REEL7 功能描述:IC CLOCK GEN 2.5GHZ VCO 64LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器,PLL,频率合成器 系列:- 标准包装:2,000 系列:- 类型:PLL 时钟发生器 PLL:带旁路 输入:LVCMOS,LVPECL 输出:LVCMOS 电路数:1 比率 - 输入:输出:2:11 差分 - 输入:输出:是/无 频率 - 最大:240MHz 除法器/乘法器:是/无 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP(7x7) 包装:带卷 (TR)
AD9520-2 制造商:AD 制造商全称:Analog Devices 功能描述:12 LVPECL/24 CMOS Output Clock Generator with Integrated 2.2 GHz VCO