- 您现在的位置：买卖IC网 > PDF目录20639 > ADE7878ACPZ (Analog Devices Inc)IC ENERGY METERING 3PH 40LFCSP PDF资料下载
参数资料
| 型号： | ADE7878ACPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 73/100页 |
| 文件大小： | 0K |
| 描述： | IC ENERGY METERING 3PH 40LFCSP |
| 标准包装： | 1 |
| 输入阻抗： | 400 千欧 |
| 测量误差： | 0.2% |
| 电压 - 高输入/输出： | 2.4V |
| 电压 - 低输入/输出： | 0.4V |
| 电源电压： | 2.4 V ~ 3.7 V |
| 测量仪表类型： | 3 相 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 40-WFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 40-LFCSP-WQ（6x6） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页当前第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页
Data Sheet
HSDC Interface
The high speed data capture (HSDC) interface is disabled after
ADE7878 is configured with an I 2 C interface. The SPI interface
of the ADE7854 / ADE7858 / ADE7868 / ADE7878 cannot be used
simultaneously with HSDC.
Bit 6 (HSDCEN) in the CONFIG register activates HSDC when
set to 1. If Bit HSDCEN is cleared to 0, the default value, the
HSDC interface is disabled. Setting Bit HSDCEN to 1 when SPI
is in use does not have any effect. HSDC is an interface for
sending to an external device (usually a microprocessor or a
DSP) up to sixteen 32-bit words. The words represent the
instantaneous values of the phase currents and voltages, neutral
current, and active, reactive, and apparent powers. The registers
being transmitted include IAWV, VAWV, IBWV, VBWV, ICWV,
VCWV, INWV, AVA, BVA, CVA, AWATT, BWATT, CWATT,
AVAR, BVAR, and CVAR. All are 24-bit registers that are sign
extended to 32-bits (see Figure 37 for details). In the case of
ADE7854 and ADE7858 , the INWV register is not available. In
its place, the HSDC transmits one 32-bit word always equal
to 0. In addition, the AVAR, BVAR, and CVAR registers are not
available in the ADE7854 . In their place, the HSDC transmits
three 32-bit words that are always equal to 0.
HSDC can be interfaced with SPI or similar interfaces. HSDC is
always a master of the communication and consists of three
pins: HSA, HSD, and HSCLK. HSA represents the select signal.
It stays active low or high when a word is transmitted and it is
usually connected to the select pin of the slave. HSD sends data
to the slave and it is usually connected to the data input pin of
the slave. HSCLK is the serial clock line that is generated by the
nected to the serial clock input of the slave. Figure 91 shows the
connections between the ADE78xx HSDC and slave devices
containing an SPI interface.
ADE7854/ADE7858/ADE7868/ADE7878
Bit 0 (HCLK) in the HSDC_CFG register determines the serial
clock frequency of the HSDC communication. When HCLK is
0 (the default value), the clock frequency is 8 MHz. When HCLK
is 1, the clock frequency is 4 MHz. A bit of data is transmitted
for every HSCLK high-to-low transition. The slave device that
receives data from HSDC samples the HSD line on the low-to-
high transition of HSCLK.
The words can be transmitted as 32-bit packages or as 8-bit
packages. When Bit 1 (HSIZE) in the HSDC_CFG register is 0 (the
default value), the words are transmitted as 32-bit packages. When
Bit HSIZE is 1, the registers are transmitted as 8-bit packages. The
HSDC interface transmits the words MSB first.
Bit 2 (HGAP) introduces a gap of seven HSCLK cycles between
packages when Bit 2 (HGAP) is set to 1. When Bit HGAP is cleared
to 0 (the default value), no gap is introduced between packages
and the communication time is shortest. In this case, HSIZE
does not have any influence on the communication and a data
bit is placed on the HSD line with every HSCLK high-to-low
transition.
Bits[4:3] (HXFER[1:0]) decide how many words are transmitted.
When HXFER[1:0] is 00, the default value, then all 16 words are
transmitted. When HXFER[1:0] is 01, only the words representing
the instantaneous values of phase and neutral currents and phase
voltages are transmitted in the following order: IAWV, VAWV,
IBWV, VBWV, ICWV, VCWV, and one 32-bit word that is always
equal to INWV. When HXFER[1:0] is 10, only the instantaneous
values of phase powers are transmitted in the following order:
AVA, BVA, CVA, AWATT, BWATT, CWATT, AVAR, BVAR, and
CVAR. The value, 11, for HXFER[1:0] is reserved and writing it is
equivalent to writing 00, the default value.
Bi t 5 (HSAPOL) determines the polarity of HSA function of the
SS/HSA pin during communication. When HSAPOL is 0 (the
default value), HSA is active low during the communication.
This means that HSA stays high when no communication is in
ADE78xx
MISO/HSD
CF3/HSCLK
SS/HSA
SPI DEVICE
MISO
SCK
SS
progress. When a communication is executed, HSA is low when
the 32-bit or 8-bit packages are transferred, and is high during
the gaps. When HSAPOL is 1, the HSA function of the SS/HSA
pin is active high during the communication. This means that
Figure 91. Connecting the ADE78xx HSDC with an SPI
The HSDC communication is managed by the HSDC_CFG
register (see Table 53). It is recommended to set the HSDC_CFG
register to the desired value before enabling the port using Bit 6
(HSDCEN) in the CONFIG register. In this way, the state of
various pins belonging to the HSDC port do not take levels incon-
sistent with the desired HSDC behavior. After a hardware reset
or after power-up, the MISO/HSD and SS/HSA pins are set high.
HSA stays low when no communication is in progress. When a
communication is executed, HSA is high when the 32-bit or
8-bit packages are transferred, and is low during the gaps.
Bits[7:6] of the HSDC_CFG register are reserved. Any value
written into these bits does not have any consequence on HSDC
behavior.
HXFER[1:0] = 00 and HSAPOL = 0. Note that the HSDC
interface sets a data bit on the HSD line every HSCLK high-
to-low transition and the value of Bit HSIZE is irrelevant.
Rev. H | Page 73 of 100
相关PDF资料 |
PDF描述 |
|---|---|
| GBC06DREI-S13 | CONN EDGECARD 12POS .100 EXTEND |
| VI-J60-CX-F4 | CONVERTER MOD DC/DC 5V 75W |
| ECA10DCBT | CONN EDGECARD 20POS R/A .125 SLD |
| EL7242CSZ-T13 | IC DRIVER MOSFET DUAL HS 8-SOIC |
| ADE7169ASTZF16 | IC ENERGY METER 1PHASE 64LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADE7878ACPZ | 制造商:Analog Devices 功能描述:IC MULTIFUNCTION ENERGY METERING LFCSP40 |
| ADE7878ACPZ-RL | 功能描述:IC ENERGY METERING 3PH 40LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
| ADE7878XCPZ | 制造商:Analog Devices 功能描述:POLY PHASE MULTIFUNCTION ENERGY METERING IC WITH TOTAL - Bulk |
| ADE7880 | 制造商:Analog Devices 功能描述:BOARD EVAL ENERGY METER ADE |
| ADE7880ACPZ | 功能描述:IC ENERGY METERING 3PH 40LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
发布紧急采购，3分钟左右您将得到回复。