- 您现在的位置：买卖IC网 > PDF目录98081 > SII3531ACNU PCI BUS CONTROLLER, QCC48 PDF资料下载
参数资料
| 型号： | SII3531ACNU |
| 元件分类： | 总线控制器 |
| 英文描述： | PCI BUS CONTROLLER, QCC48 |
| 封装： | 7 X 7 MM, 0.40 MM PITCH, LEAD FREE, QFN-48 |
| 文件页数： | 31/81页 |
| 文件大小： | 532K |
| 代理商： | SII3531ACNU |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页当前第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页
PCI Express to Serial ATA Controller
Data Sheet
Silicon Image, Inc.
2006 Silicon Image, Inc.
SiI-DS-0208-C
37
Unrecognized FIS. Indicates that the F-bit has been set in the Serror Diag field. Writing a one to bit 6 or 22 of
the port Interrupt Status Register clears this interrupt condition. This interrupt is enabled or disabled with the
corresponding bit in the port Interrupt Enable Set/Clear Register.
Device Exchanged. Indicates that the X-bit has been set in the Serror Diag field. The X-bit is set upon receipt of
a COMINIT from the device. Writing a one to bit 7 or 23 of the port Interrupt Status Register clears this interrupt
condition. This interrupt is enabled or disabled with the corresponding bit in the port Interrupt Enable Set/Clear
Register.
8b/10b Decode Error Threshold Exceeded. Indicates that the 8b/10b Decode Error counter has exceeded the
programmed non-zero threshold value. Writing any value to the port 8b/10b Decode Error Counter Register or
writing a one to bit 8 or 24 of the Interrupt Status Clear Register will clear this interrupt condition. This interrupt is
enabled by writing a non-zero value to the threshold field (bit[31:16]) of the port 8b/10b Decode Error Counter
Register. Writing a zero the threshold field will disable this interrupt.
CRC Error Threshold Exceeded. Indicates that the CRC Error counter has exceeded the programmed non-zero
threshold value. Writing any value to the port CRC Error Counter Register or writing a one to bit 9 or 25 of the
Interrupt Status Clear Register will clear this interrupt condition. This interrupt is enabled by writing a non-zero
value to the threshold field (bit[31:16]) of the port CRC Error Counter Register. Writing a zero to the threshold
field will disable this interrupt.
Handshake Error Threshold Exceeded. Indicates that the Handshake Error counter has exceeded the
programmed non-zero threshold value. A handshake error occurs when an R_ERR primitive is received. Writing
any value to the port Handshake Error Counter Register or writing a one to bit 10 or 26 of the Interrupt Status
Clear Register will clear this interrupt condition. This interrupt is enabled by writing a non-zero value to the
threshold field (bit[31:16]) of the port Handshake Error Counter Register. Writing a zero to the threshold field will
disable this interrupt.
SDB Notify. Indicates that a “Set Device Bits” FIS has been received with the N-bit set in the control field.
ATAPI and Port Multiplier devices optionally use this feature to signal the host that an event has occurred that
requires further scrutiny. Writing a one to bit 11 or 27 of the port Interrupt Status Register clears this interrupt
condition. This interrupt is enabled or disabled with the corresponding bit in the port Interrupt Enable Set/Clear
Register.
相关PDF资料 |
PDF描述 |
|---|---|
| SIO10N268-NU | MULTIFUNCTION PERIPHERAL, PQFP128 |
| SIS300 | GRAPHICS PROCESSOR, PBGA365 |
| SK12430PJT | 800 MHz, OTHER CLOCK GENERATOR, PQCC28 |
| SK12439PJ | 800 MHz, OTHER CLOCK GENERATOR, PQCC28 |
| SK12439PJT | 800 MHz, OTHER CLOCK GENERATOR, PQCC28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SII3611 | 制造商:SILICONIMAGE 制造商全称:SILICONIMAGE 功能描述:SATALink Device Bridge |
| SII3611CT80-1.5 | 制造商:SILICON IMAGE 功能描述:3611CT80-1.5 |
| SII3723 | 制造商:SILICONIMAGE 制造商全称:SILICONIMAGE 功能描述:Third Generation SATA Port Multiplier Storage Processor |
| SiI3723CNU | 制造商:Silicon Image Inc 功能描述: |
| SII3726 | 制造商:SILICONIMAGE 制造商全称:SILICONIMAGE 功能描述:SATA Port Multiplier |
发布紧急采购，3分钟左右您将得到回复。