参数资料
型号: W9725G6IB-18
厂商: WINBOND ELECTRONICS CORP
元件分类: DRAM
英文描述: 16M X 16 DDR DRAM, 0.35 ns, PBGA84
封装: 8 X 12.50 MM, ROHS COMPLIANT, WBGA-84
文件页数: 31/69页
文件大小: 1644K
代理商: W9725G6IB-18
PRELIMINARY W9725G6IB
Publication Release Date:Nov. 14, 2008
- 37 -
Revision P04
9. ELECTRICAL CHARACTERISTICS
9.1. Absolute Maximum Ratings
PARAMETER
SYMBOL
RATING
UNIT
NOTES
Voltage on VDD pin relative to VSS
VDD
-1.0 ~ 2.3
V
1, 2
Voltage on VDDQ pin relative to VSS
VDDQ
-0.5 ~ 2.3
V
1, 2
Voltage on VDDL pin relative to VSS
VDDL
-0.5 ~ 2.3
V
1, 2
Voltage on any pin relative to VSS
VIN, VOUT
-0.5 ~ 2.3
V
1, 2
Storage Temperature
TSTG
-55 ~ 100
°C
1, 2, 3
Note:
1. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect reliability.
2. When VDD and VDDQ and VDDL are less than 500mV; VREF may be equal to or less than 300mV.
3. Storage temperature is the case surface temperature on the center/top side of the DRAM.
9.2. Operating Temperature Condition
PARAMETER
SYMBOL
RATING
UNIT
NOTES
Operating Temperature
TOPR
0 ~ 85
°C
1, 2, 3
Note:
1. Operating Temperature is the case surface temperature on the center/top side of the DRAM.
2. Supporting 0 ~ 85°C with full JEDEC AC and DC specifications.
3. Supporting 0 ~ 85 °C and being able to extend to 95 °C with doubling Auto Refresh commands in frequency to a 32 mS
period ( tREFI = 3.9 S) and to enter to Self Refresh mode at this high temperature range via A7 "1" on EMR (2).
9.3. Recommended DC Operating Conditions
(0
℃ ≤ TCASE 85for -18/-25/-3, VDD, VDDQ = 1.8V ± 0.1V)
SYM.
PARAMETER
MIN.
TYP.
MAX.
UNIT
NOTES
VDD
Supply Voltage
1.7
1.8
1.9
V
1
VDDL
Supply Voltage for DLL
1.7
1.8
1.9
V
5
VDDQ
Supply Voltage for Output
1.7
1.8
1.9
V
1, 5
VREF
Input Reference Voltage
0.49 x VDDQ
0.5 x VDDQ
0.51 x VDDQ
V
2, 3
VTT
Termination Voltage (System)
VREF - 0.04
VREF
VREF + 0.04
V
4
Note:
1. There is no specific device VDD supply voltage requirement for SSTL_18 compliance. However under all conditions VDDQ
must than or equal to VDD.
2. The value of VREF may be selected by the user to provide optimum noise margin in the system. Typically the value of VREF
is expected to be about 0.5 x VDDQ of the transmitting device and VREF is expected to track variations in VDDQ.
3. Peak to peak AC noise on VREF may not exceed +/-2 % VREF(dc).
4. VTT of transmitting device must track VREF of receiving device.
5. VDDQ tracks with VDD, VDDL tracks with VDD. AC parameters are measured with VDD, VDDQ and VDDDL tied together.
相关PDF资料
PDF描述
W9864G6EB-7 4M X 16 SYNCHRONOUS DRAM, 5.5 ns, PBGA60
WE128K8200CQ 128K X 8 EEPROM 5V MODULE, 200 ns, CDIP32
WED9LC6816V1512BI SPECIALTY MEMORY CIRCUIT, PBGA153
WS128K32-35G2TMEA 128K X 32 MULTI DEVICE SRAM MODULE, 35 ns, CQFP68
WS128K32-55G2TIE 128K X 32 MULTI DEVICE SRAM MODULE, 55 ns, CQFP68
相关代理商/技术参数
参数描述
W9725G6IB-25 功能描述:IC DDR2-800 SDRAM 256MB 84-WBGA RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C,2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC(0.173",4.40mm 宽) 供应商设备封装:8-MFP 包装:带卷 (TR)
W9725G6JB 制造商:WINBOND 制造商全称:Winbond 功能描述:4M ? 4 BANKS ? 16 BIT DDR2 SDRAM
W9725G6JB-25 制造商:Winbond Electronics Corp 功能描述:DRAM Chip DDR2 SDRAM 256M-Bit 16Mx16 1.8V 84-Pin WBGA 制造商:Winbond Electronics 功能描述:512MB DDRII
W9725G6JB25I 功能描述:IC DDR2 SDRAM 256MBIT 84WBGA RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:150 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (2 x 256 x 8) 速度:400kHz 接口:I²C,2 线串口 电源电压:2.5 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-DFN(2x3) 包装:管件 产品目录页面:1445 (CN2011-ZH PDF)
W9725G6KB-18 制造商:Winbond Electronics 功能描述:IC MEMORY 制造商:Winbond Electronics Corp 功能描述:IC MEMORY