参数资料
型号: PC87393F-VJG
厂商: NATIONAL SEMICONDUCTOR CORP
元件分类: 外设及接口
英文描述: 100-Pin LPC SuperI/O Devices for Portable Applications
中文描述: MULTIFUNCTION PERIPHERAL, PQFP100
封装: TQFP-100
文件页数: 145/148页
文件大小: 1733K
代理商: PC87393F-VJG
96
www.national.com
6.0
Musical Instrument Digital Interface (MIDI) Port
Note: This section applies to the PC87393 and PC87393F only.
6.1
OVERVIEW
This chapter describes a generic MIDI Port. For the implementation used in this device, see the
Conguration chapter.
The MIDI Port is an asynchronous receiver/transmitter that uses a two-wire, bi-directional, relatively slow communication
channel to transmit and receive data bytes to or from MIDI-compliant devices, according to a predefined communication pro-
tocol. The MIDI Port is compatible with MPU-401 UART mode.
The MIDI was originally defined to establish a standard interface between computers and digital musical instruments such
as synthesizers, and has become the de facto standard for this purpose. However, the MIDI is also commonly used for other
purposes, such as communicating with advanced game devices.
The MIDI Port serves as a communication pipe between software and a MIDI device. The software and the MIDI device must
interpret the data they exchange, and act accordingly.
The MIDI Port supports the following two feature types:
q
Legacy (MPU-401)
q
Enhanced.
Legacy. These include all features supported by MPU-401 UART mode. They can all be operated via the Legacy I/O ad-
dress space of 2 bytes, traditionally allocated for the MIDI Port.
Enhanced. These features extend the capabilities of the MIDI Port. They can only be operated if the MIDI is allocated with
an address space of at least 3 bytes.
The basic system configuration of the MIDI Port consists of the port itself, a single pull-up resistor for the MDRX pin, and a
MIDI compliant device. This system configuration is shown in Figure 17. The purpose of the pull-up resistor is to make sure
that the MIDI Port senses an inactive (high) MIDI receive signal in the absence of a MIDI device.
Figure 17. MIDI System Conguration
6.2
FUNCTIONAL DESCRIPTION
The MIDI Port consists of five major functional blocks:
q
Internal Bus Interface Unit
q
Port Control and Status Registers
q
Data Buffers and FIFOs
q
MIDI Communication Engine
q
MIDI Signals Routing Control Logic.
See Figure 18 for a block diagram of the MIDI Port.
MIDI
Port
MIDI Transmit
MIDI Receive
Game
Device
MIDI
Device
MIDI Receive
MIDI Transmit
MDRX Pin
MDTX Pin
R
相关PDF资料
PDF描述
PC906N 896 MHz - 940 MHz YAGI ANTENNA, 10.65 dBi GAIN, 65 deg 3dB BEAMWIDTH
PC926N 928 MHz - 960 MHz YAGI ANTENNA, 10.65 dBi GAIN, 65 deg 3dB BEAMWIDTH
PCA.1D.694.CNAD42Z CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET
PCA.1D.694.CNAD42 CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET
PCA.1D.694.CNAD52Z CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET
相关代理商/技术参数
参数描述
PC87393VJG 制造商:Texas Instruments 功能描述: 制造商:Texas Instruments 功能描述:IC, SUPER I/O DEVICE, TQFP-100, Logic Device Type:Buffer, Supply Voltage Min:3V,
PC87393-VJG 制造商:NSC 制造商全称:National Semiconductor 功能描述:100-Pin LPC SuperI/O Devices for Portable Applications
PC87410 制造商:NSC 制造商全称:National Semiconductor 功能描述:PC87410 PCI-IDE Interface Controller
PC87410VLK 制造商:Rochester Electronics LLC 功能描述:- Bulk
PC87413 制造商:NSC 制造商全称:National Semiconductor 功能描述:LPC ServerI/O for Servers and Workstations