1Gb DDR3 SDRAM A-Die
NT5CB256M4AN / NT5CB128M8AN / NT5CB64M16AP
1
REV 1.2
01 / 2009
Feature
1.5V ± 0.75V (JEDEC Standard Power Supply)
8 Internal memory banks (BA0- BA2)
Differential clock input (CK,
)
Programmable
Latency: 5, 6, 7, 8, 9
Programmable Additive Latency: 0, CL-1, CL-2
Programmable Sequential / Interleave Burst Type
Programmable Burst Length: 4, 8
8 bit prefetch architecture
Output Driver Impedance Control
Write Leveling
OCD Calibration
Dynamic ODT (Rtt_Nom & Rtt_WR)
Auto Self-Refresh
Self-Refresh Temperature
Partial Array Self-Refresh
RoHS Compliance
Packages:
60-Ball BGA for x8 components
84-Ball BGA for x16 components
Description
The 1Gb Double-Data-Rate-3 (DDR3) DRAMs is a high-speed CMOS Double Data Rate32 SDRAM containing 1,073,741,824 bits. It is
internally configured as an octal-bank DRAM.
The 1Gb chip is organized as 32Mbit x 4 I/O x 8, 16Mbit x 8 I/O x 8 bank or 8Mbit x 16 I/O x 8 bank device. These synchronous devices
achieve high speed double-data-rate transfer rates of up to 1600 Mb/sec/pin for general applications.
The chip is designed to comply with all key DDR3 DRAM key features and all of the control and address inputs are synchronized with a
pair of externally supplied differential clocks. Inputs are latched at the cross point of differential clocks (CK rising and
falling). All
I/Os are synchronized with a single ended DQS or differential DQS pair in a source synchronous fashion.
These devices operate with a single 1.5V ± 0.75V power supply and are available in BGA packages.