- 您现在的位置：买卖IC网 > PDF目录11210 > ADUC7061BCPZ32-RL (Analog Devices Inc)IC MCU 16/32BIT 32KB 32LFCSP PDF资料下载
参数资料
| 型号： | ADUC7061BCPZ32-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 27/108页 |
| 文件大小： | 0K |
| 描述： | IC MCU 16/32BIT 32KB 32LFCSP |
| 产品变化通告： | ADuC7060/1 Idd Specification Change 01/Feb/2010 |
| 设计资源： | USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075) 4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145) |
| 标准包装： | 5,000 |
| 系列： | MicroConverter® ADuC7xxx |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 10MHz |
| 连通性： | I²C，SPI，UART/USART |
| 外围设备： | POR，PWM，温度传感器，WDT |
| 输入/输出数： | 8 |
| 程序存储器容量： | 32KB（16K x 16） |
| 程序存储器类型： | 闪存 |
| RAM 容量： | 1K x 32 |
| 电压 - 电源 (Vcc/Vdd)： | 2.375 V ~ 2.625 V |
| 数据转换器： | A/D 5x24b，8x24b，D/A 1x14b |
| 振荡器型： | 内部 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页当前第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页
Data Sheet
ADuC7060/ADuC7061
Rev. D | Page 25 of 108
FEEDAT Register
FEEDAT is a 16-bit data register. This register holds the data
value for flash read and write commands.
Name:
FEEDAT
Address:
0xFFFF0E0C
Default value:
0xXXXX
Access:
Read and write
FEEADR Register
FEEADR is a 16-bit address register used for accessing
individual pages of the 32 kB flash block. The valid address
range for a user is: 0x0000 to 0x77FF. This represents the 30 kB
flash user memory space. A read or write access outside this
boundary causes a data abort exception to occur.
Name:
FEEADR
Address:
0xFFFF0E10
Default value:
0x0000
Access:
Read and write
FEESIGN Register
The FEESIGN register is a 24-bit MMR. This register is updated
with the 24-bit signature value after the signature command is
executed. This value is the result of the linear feedback shift
register (LFSR) operation initiated by the signature command.
Name:
FEESIGN
Address:
0xFFFF0E18
Default value:
0xFFFFFF
Access:
Read
FEEPRO Register
The FEEPRO MMR provides protection following a subsequent
reset of the MMR. It requires a software key (see Table 16).
Name:
FEEPRO
Address:
0xFFFF0E1C
Default value:
0x00000000
Access:
Read and write
FEEHIDE Register
The FEEHIDE MMR provides immediate protection. It does
not require any software key. Note that the protection settings
in FEEHIDE are cleared by a reset (see Table 16).
Name:
FEEHIDE
Address:
0xFFFF0E20
Default value:
0xFFFFFFFF
Access:
Read and write
Table 16. FEEPRO and FEEHIDE MMR Bit Designations
Bit
Description
31
Read protection.
Cleared by user to protect all code. No JTAG read
accesses for protected pages if this bit is cleared.
Set by the user to allow reading the code via JTAG.
30
Protection for Page 59 (0x00087600 to 0x000877FF).
Set by the user to allow writing to Page 59. Cleared to
protect Page 59.
29
Protection for Page 58 (0x00087400 to 0x000875FF).
Set by the user to allow writing to Page 58. Cleared to
protect Page 58.
28:0
Write protection for Page 57 to Page 0. Each bit
represents two pages. Each page is 512 bytes in size.
Bit 0 is protection for Page 0 and Page 1 (0x00080000
to 0x000803FF). Set by the user to allow writing Page 0
and Page 1. Cleared to protect Page 0 and Page 1.
Bit 1 is protection for Page 2 and Page 3 (0x00080400
to 0x000807FF. Set by the user to allow writing Page 2
and Page 3. Cleared to protect Page 2 and Page 3.
…
Bit 27 is protection for page 54 and page 55 (0x86C00
to 0x86FFF). Set by the user to allow writing to Page
54 and Page 55. Cleared to protect Page 54 and Page
55.
Bit 28 is protection for page 56 and page 57 (0x87000
to 0x873FF). Set by the user to allow writing to Page
56 and Page 57. Cleared to protect Page 56 and Page
57.
Temporary Protection
Temporary protection can be set and removed by writing
directly into the FEEHID MMR. This register is volatile and,
therefore, protection is only in place for as long as the part
remains powered on. The protection setting is not reloaded
after a power cycle.
Keyed Permanent Protection
Keyed permanent protection can be set via FEEPRO to lock the
protection configuration. The software key used at the start of
the required FEEPRO write sequence is saved one time only
and must be used for any subsequent access of the FEEHID or
FEEPRO MMRs. A mass erase sets the software protection key
back to 0xFFFF but also erases the entire user code space.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B2L-IW-F4 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8JU | MCU AVR 8K ISP FLASH MEM 44-PLCC |
| VI-B2L-IW-F3 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8PU | IC AVR MCU 8K 8MHZ 3V 40DIP |
| VI-B2L-IW-F2 | CONVERTER MOD DC/DC 28V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADUC70SMARTLINKRL7 | 制造商:Analog Devices 功能描述: |
| ADUC70TEL | 制造商:Analog Devices 功能描述:FLASH ARM +5-CH 12BIT ADC - Trays |
| ADUC70TEL-RL7 | 制造商:Analog Devices 功能描述: |
| ADUC7120BBCZ | 制造商:Analog Devices 功能描述:- Rail/Tube |
| ADUC7120BBCZ-RL | 制造商:Analog Devices 功能描述:- Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。