- 您现在的位置：买卖IC网 > PDF目录11210 > ADUC7061BCPZ32-RL (Analog Devices Inc)IC MCU 16/32BIT 32KB 32LFCSP PDF资料下载
参数资料
| 型号： | ADUC7061BCPZ32-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 46/108页 |
| 文件大小： | 0K |
| 描述： | IC MCU 16/32BIT 32KB 32LFCSP |
| 产品变化通告： | ADuC7060/1 Idd Specification Change 01/Feb/2010 |
| 设计资源： | USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075) 4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145) |
| 标准包装： | 5,000 |
| 系列： | MicroConverter® ADuC7xxx |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 10MHz |
| 连通性： | I²C，SPI，UART/USART |
| 外围设备： | POR，PWM，温度传感器，WDT |
| 输入/输出数： | 8 |
| 程序存储器容量： | 32KB（16K x 16） |
| 程序存储器类型： | 闪存 |
| RAM 容量： | 1K x 32 |
| 电压 - 电源 (Vcc/Vdd)： | 2.375 V ~ 2.625 V |
| 数据转换器： | A/D 5x24b，8x24b，D/A 1x14b |
| 振荡器型： | 内部 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页当前第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页
ADuC7060/ADuC7061
Data Sheet
Rev. D | Page 42 of 108
Table 40. ADCSTA MMR Bit Designations
Bit
Name
Description
15
ADCCALSTA
ADC calibration status.
This bit is set automatically in hardware to indicate that an ADC calibration cycle has been completed.
This bit is cleared after ADCMDE is written to.
14
Not used.
This bit is reserved for future functionality.
13
ADC1CERR
Auxiliary ADC conversion error.
This bit is set automatically in hardware to indicate that an auxiliary ADC conversion overrange or underrange has
occurred. The conversion result is clamped to negative full scale (underrange error) or positive full scale (overrange
error) in this case.
This bit is cleared when a valid (in-range) voltage conversion result is written to the ADC1DAT register.
12
ADC0CERR
Primary ADC conversion error.
This bit is set automatically in hardware to indicate that a primary ADC conversion overrange or underrange has
occurred. The conversion result is clamped to negative full scale (underrange error) or positive full scale (overrange
error) in this case.
This bit is cleared when a valid (in-range) conversion result is written to the ADC0DAT register.
11:7
Not used. These bits are reserved for future functionality and should not be monitored by user code.
6
ADC0ATHEX
ADC0 accumulator comparator threshold exceeded.
This bit is set when the ADC0 accumulator value in ADC0ACC exceeds the threshold value programmed in the ADC0
comparator threshold register, ADC0ATH.
This bit is cleared when the value in ADC0ACC does not exceed the value in ADC0ATH.
5
Not used. This bit is reserved for future functionality and should not be monitored by user code.
4
ADC0THEX
Primary channel ADC comparator threshold. This bit is valid only if the primary channel ADC comparator is enabled
via the ADCCFG MMR.
This bit is set by hardware if the absolute value of the primary ADC conversion result exceeds the value written in the
ADC0TH MMR. If the ADC threshold counter is used (ADC0RCR), this bit is set only when the specified number of
primary ADC conversions equals the value in the ADC0THV MMR.
Otherwise, this bit is cleared.
3
ADC0OVR
Primary channel ADC overrange bit. If the overrange detect function is enabled via the ADCCFG MMR, this bit is set by
hardware if the primary ADC input is grossly (>30% approximate) overrange. This bit is updated every 125 s. After it
is set, this bit can be cleared only by software when ADCCFG[2] is cleared to disable the function, or the ADC gain is
changed via the ADC0CON MMR.
2
Not used. This bit is reserved for future functionality and should not be monitored by user code.
1
ADC1RDY
Auxiliary ADC result ready bit.
If the auxiliary channel ADC is enabled, this bit is set by hardware as soon as a valid conversion result is written in the
ADC1DAT MMR. It is also set at the end of a calibration sequence.
This bit is cleared by reading ADC1DAT followed by reading ADC0DAT. ADC0DAT must be read to clear this bit, even if
the primary ADC is not enabled.
0
ADC0RDY
Primary ADC result ready bit.
If the primary channel ADC is enabled, this bit is set by hardware as soon as a valid conversion result is written in the
ADC0DAT MMR. It is also set at the end of a calibration sequence.
This bit is cleared by reading ADC0DAT.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B2L-IW-F4 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8JU | MCU AVR 8K ISP FLASH MEM 44-PLCC |
| VI-B2L-IW-F3 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8PU | IC AVR MCU 8K 8MHZ 3V 40DIP |
| VI-B2L-IW-F2 | CONVERTER MOD DC/DC 28V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADUC70SMARTLINKRL7 | 制造商:Analog Devices 功能描述: |
| ADUC70TEL | 制造商:Analog Devices 功能描述:FLASH ARM +5-CH 12BIT ADC - Trays |
| ADUC70TEL-RL7 | 制造商:Analog Devices 功能描述: |
| ADUC7120BBCZ | 制造商:Analog Devices 功能描述:- Rail/Tube |
| ADUC7120BBCZ-RL | 制造商:Analog Devices 功能描述:- Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。