- 您现在的位置：买卖IC网 > PDF目录11210 > ADUC7061BCPZ32-RL (Analog Devices Inc)IC MCU 16/32BIT 32KB 32LFCSP PDF资料下载
参数资料
| 型号： | ADUC7061BCPZ32-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 64/108页 |
| 文件大小： | 0K |
| 描述： | IC MCU 16/32BIT 32KB 32LFCSP |
| 产品变化通告： | ADuC7060/1 Idd Specification Change 01/Feb/2010 |
| 设计资源： | USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075) 4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145) |
| 标准包装： | 5,000 |
| 系列： | MicroConverter® ADuC7xxx |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 10MHz |
| 连通性： | I²C，SPI，UART/USART |
| 外围设备： | POR，PWM，温度传感器，WDT |
| 输入/输出数： | 8 |
| 程序存储器容量： | 32KB（16K x 16） |
| 程序存储器类型： | 闪存 |
| RAM 容量： | 1K x 32 |
| 电压 - 电源 (Vcc/Vdd)： | 2.375 V ~ 2.625 V |
| 数据转换器： | A/D 5x24b，8x24b，D/A 1x14b |
| 振荡器型： | 内部 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页当前第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页
Data Sheet
ADuC7060/ADuC7061
Rev. D | Page 59 of 108
PROCESSOR REFERENCE PERIPHERALS
INTERRUPT SYSTEM
There are 15 interrupt sources on the ADuC706x that are con-
trolled by the interrupt controller. All interrupts are generated
from the on-chip peripherals, except for the software interrupt
(SWI), which is programmable by the user. The ARM7TDMI
CPU core recognizes interrupts as one of two types only: a
normal interrupt request (IRQ) or a fast interrupt request
(FIQ). All the interrupts can be masked separately.
The control and configuration of the interrupt system are
managed through a number of interrupt related registers. The
bits in each IRQ and FIQ register represent the same interrupt
source, as described in Table 65.
Each ADuC706x contains a vectored interrupt controller (VIC)
that supports nested interrupts up to eight levels. The VIC also
allows the programmer to assign priority levels to all interrupt
sources. Interrupt nesting needs to be enabled by setting the
ENIRQN bit in the IRQCONN register. A number of extra
MMRs are used when the full vectored interrupt controller is
enabled.
Immediately save IRQSTA/FIQSTA upon entering the interrupt
service routine (ISR) to ensure that all valid interrupt sources
are serviced.
Table 65. IRQ/FIQ MMR Bit Designations
Bit
Description
Comments
0
All interrupts OR’ed
(FIQ only)
This bit is set if any FIQ is active
1
Software interrupt
User programmable interrupt
source
2
Undefined
This bit is not used
3
Timer0
General-Purpose Timer0
4
Timer1 or wake-up
timer
General-Purpose Timer1 or
wake-up timer
5
Timer2 or watchdog
timer
General-Purpose Timer2 or
watchdog timer
6
Timer3 or STI timer
General-Purpose Timer3
7
Undefined
This bit is not used
8
Undefined
This bit is not used
9
Undefined
This bit is not used
10
ADC
ADC interrupt source bit
11
UART
UART interrupt source bit
12
SPI
SPI interrupt source bit
13
XIRQ0 (GPIO IRQ0)
External Interrupt 0
14
XIRQ1 (GPIO IRQ1)
External Interrupt 1
15
I2C master IRQ
I2C master interrupt source bit
16
I2C slave IRQ
I2C slave interrupt source bit
17
PWM
PWM trip interrupt source bit
18
XIRQ2 (GPIO IRQ2)
External Interrupt 2
19
XIRQ3 (GPIO IRQ3)
External Interrupt 3
IRQ
The IRQ is the exception signal to enter the IRQ mode of the
processor. It services general-purpose interrupt handling of
internal and external events.
All 32 bits are logically OR’ed to create a single IRQ signal to
the ARM7TDMI core. The four 32-bit registers dedicated to
IRQ are described in the following sections.
IRQSIG
IRQSIG reflects the status of the different IRQ sources. If a
peripheral generates an IRQ signal, the corresponding bit in
the IRQSIG is set; otherwise, it is cleared. The IRQSIG bits clear
when the interrupt in the particular peripheral is cleared. All
IRQ sources can be masked in the IRQEN MMR. IRQSIG is
read only.
IRQSIG Register
Name:
IRQSIG
Address:
0xFFFF0004
Default value: Undefined
Access:
Read only
IRQEN
IRQEN provides the value of the current enable mask. When a
bit is set to 1, the corresponding source request is enabled
to create an IRQ exception. The IRQEN register cannot be used
to disable an interrupt. Clear to 0 has no effect.
IRQEN Register
Name:
IRQEN
Address:
0xFFFF0008
Default value:
0x00000000
Access:
Read and write
IRQCLR
IRQCLR is a write-only register that allows the IRQEN register
to clear to mask an interrupt source. Each bit that is set to 1
clears the corresponding bit in the IRQEN register without
affecting the remaining bits. The pair of registers, IRQEN and
IRQCLR, allows independent manipulation of the enable mask
without requiring an atomic read-modify-write. Clear to 0 has
no effect.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B2L-IW-F4 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8JU | MCU AVR 8K ISP FLASH MEM 44-PLCC |
| VI-B2L-IW-F3 | CONVERTER MOD DC/DC 28V 100W |
| ATMEGA8535L-8PU | IC AVR MCU 8K 8MHZ 3V 40DIP |
| VI-B2L-IW-F2 | CONVERTER MOD DC/DC 28V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADUC70SMARTLINKRL7 | 制造商:Analog Devices 功能描述: |
| ADUC70TEL | 制造商:Analog Devices 功能描述:FLASH ARM +5-CH 12BIT ADC - Trays |
| ADUC70TEL-RL7 | 制造商:Analog Devices 功能描述: |
| ADUC7120BBCZ | 制造商:Analog Devices 功能描述:- Rail/Tube |
| ADUC7120BBCZ-RL | 制造商:Analog Devices 功能描述:- Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。