收藏本站
参数资料
型号： ADUC7061BCPZ32-RL
厂商： Analog Devices Inc
文件页数： 83/108页
文件大小： 0K
描述： IC MCU 16/32BIT 32KB 32LFCSP
产品变化通告： ADuC7060/1 Idd Specification Change 01/Feb/2010
设计资源： USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075)
4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145)
标准包装： 5,000
系列： MicroConverter® ADuC7xxx
核心处理器： ARM7
芯体尺寸： 16/32-位
速度： 10MHz
连通性： I²C，SPI，UART/USART
外围设备： POR，PWM，温度传感器，WDT
输入/输出数： 8
程序存储器容量： 32KB（16K x 16）
程序存储器类型： 闪存
RAM 容量： 1K x 32
电压 - 电源 (Vcc/Vdd)： 2.375 V ~ 2.625 V
数据转换器： A/D 5x24b，8x24b，D/A 1x14b
振荡器型： 内部
工作温度： -40°C ~ 125°C
封装/外壳： 32-VFQFN 裸露焊盘，CSP
包装： 带卷 (TR)
ADuC7060/ADuC7061
Data Sheet
Rev. D | Page 76 of 108
Table 85. PWMCON MMR Bit Designations
Bit
Name
Description
15
Reserved
This bit is reserved. Do not write to this bit.
14
Sync
Enables PWM synchronization.
Set to 1 by user so that all PWM counters are reset on the next clock edge after the detection of a high-to-low
transition on the P1.2/SYNC pin.
Cleared by user to ignore transitions on the P1.2/SYNC pin.
13
PWM5INV
Set to 1 by user to invert PWM5.
Cleared by user to use PWM5 in normal mode.
12
PWM3INV
Set to 1 by user to invert PWM3.
Cleared by user to use PWM3 in normal mode.
11
PWM1INV
Set to 1 by user to invert PWM1.
Cleared by user to use PWM1 in normal mode.
10
PWMTRIP
Set to 1 by user to enable PWM trip interrupt. When the PWM trip input (Pin P1.3/TRIP) is low, the PWMEN bit is
cleared and an interrupt is generated.
Cleared by user to disable the PWMTRIP interrupt.
9
ENA
If HOFF = 0 and HMODE = 1. Note that, if not in H-bridge mode, this bit has no effect.
Set to 1 by user to enable PWM outputs.
Cleared by user to disable PWM outputs.
If HOFF = 1 and HMODE = 1, see Table 86.
8:6
PWMCP[2:0]
PWM clock prescaler bits. Sets the UCLK divider.
[000] = UCLK/2.
[001] = UCLK/4.
[010] = UCLK/8.
[011] = UCLK/16.
[100] = UCLK/32.
[101] = UCLK/64.
[110] = UCLK/128.
[111] = UCLK/256.
5
POINV
Set to 1 by user to invert all PWM outputs.
Cleared by user to use PWM outputs as normal.
4
HOFF
High side off.
Set to 1 by user to force PWM0 and PWM2 outputs high. This also forces PWM1 and PWM3 low.
Cleared by user to use the PWM outputs as normal.
3
LCOMP
Load compare registers.
Set to 1 by user to load the internal compare registers with the values in PWMxCOMx on the next transition of the
PWM timer from 0x00 to 0x01.
Cleared by user to use the values previously stored in the internal compare registers.
2
DIR
Direction control.
Set to 1 by user to enable PWM0 and PWM1 as the output signals while PWM2 and PWM3 are held low.
Cleared by user to enable PWM2 and PWM3 as the output signals while PWM0 and PWM1 are held low.
1
HMODE
Enables H-bridge mode.1
Set to 1 by user to enable H-bridge mode and Bit 1 to Bit 5 of PWMCON.
Cleared by user to operate the PWMs in standard mode.
0
PWMEN
Set to 1 by user to enable all PWM outputs.
Cleared by user to disable all PWM outputs.
1 In H-bridge mode, HMODE = 1. See Table 86 to determine the PWM outputs.
相关PDF资料
PDF描述
VI-B2L-IW-F4 CONVERTER MOD DC/DC 28V 100W
ATMEGA8535L-8JU MCU AVR 8K ISP FLASH MEM 44-PLCC
VI-B2L-IW-F3 CONVERTER MOD DC/DC 28V 100W
ATMEGA8535L-8PU IC AVR MCU 8K 8MHZ 3V 40DIP
VI-B2L-IW-F2 CONVERTER MOD DC/DC 28V 100W
相关代理商/技术参数
参数描述
ADUC70SMARTLINKRL7 制造商:Analog Devices 功能描述:
ADUC70TEL 制造商:Analog Devices 功能描述:FLASH ARM +5-CH 12BIT ADC - Trays
ADUC70TEL-RL7 制造商:Analog Devices 功能描述:
ADUC7120BBCZ 制造商:Analog Devices 功能描述:- Rail/Tube
ADUC7120BBCZ-RL 制造商:Analog Devices 功能描述:- Tape and Reel
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*