- 您现在的位置：买卖IC网 > PDF目录11720 > PI7C8154BNAE (Pericom)IC PCI-PCI BRIDGE ASYNC 304-PBGA PDF资料下载
参数资料
| 型号： | PI7C8154BNAE |
| 厂商： | Pericom |
| 文件页数： | 55/114页 |
| 文件大小： | 0K |
| 描述： | IC PCI-PCI BRIDGE ASYNC 304-PBGA |
| 标准包装： | 27 |
| 系列： | * |
| 应用： | * |
| 接口： | * |
| 电源电压： | * |
| 封装/外壳： | 304-BBGA |
| 供应商设备封装： | 304-PBGA（31x31） |
| 包装： | 管件 |
| 安装类型： | 表面贴装 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页当前第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页
PI7C8154B
ASYNCHRONOUS 2-PORT
PCI-to-PCI BRIDGE
Advance Information
Page 45 of 114
JUNE 2008 REVISION 1.1
3.2.1
I/O BASE AND LIMIT ADDRESS REGISTER
PI7C8154B implements one set of I/O base and limit address registers in configuration space that
define an I/O address range per port downstream forwarding. PI7C8154B supports 32-bit I/O
addressing, which allows I/O addresses downstream of PI7C8154B to be mapped anywhere in a
4GB I/O address space.
I/O transactions with addresses that fall inside the range defined by the I/O base and limit registers
are forwarded downstream from the primary PCI bus to the secondary PCI bus. I/O transactions
with addresses that fall outside this range are forwarded upstream from the secondary PCI bus to
the primary PCI bus.
The I/O range can be turned off by setting the I/O base address to a value greater than that of the
I/O limit address. When the I/O range is turned off, all I/O trans-actions are forwarded upstream,
and no I/O transactions are forwarded downstream. The I/O range has a minimum granularity of
4KB and is aligned on a 4KB boundary. The maximum I/O range is 4GB in size. The I/O base
register consists of an 8-bit field at configuration address 1Ch, and a 16-bit field at address 30h.
The top 4 bits of the 8-bit field define bits [15:12] of the I/O base address. The bottom 4 bits read
only as 1h to indicate that PI7C8154B supports 32-bit I/O addressing. Bits [11:0] of the base
address are assumed to be 0, which naturally aligns the base address to a 4KB boundary. The 16
bits contained in the I/O base upper 16 bits register at configuration offset 30h define AD[31:16] of
the I/O base address. All 16 bits are read/write. After primary bus reset or chip reset, the value
of the I/O base address is initialized to 0000 0000h.
The I/O limit register consists of an 8-bit field at configuration offset 1Dh and a 16-bit field at
offset 32h. The top 4 bits of the 8-bit field define bits [15:12] of the I/O limit address. The bottom 4
bits read only as 1h to indicate that 32-bit I/O addressing is supported. Bits [11:0] of the limit
address are assumed to be FFFh, which naturally aligns the limit address to the top of a 4KB I/O
address block. The 16 bits contained in the I/O limit upper 16 bits register at configuration offset
32h define AD[31:16] of the I/O limit address. All 16 bits are read/write. After primary bus reset or
chip reset, the value of the I/O limit address is reset to 0000 0FFFh.
Note: The initial states of the I/O base and I/O limit address registers define an I/O range of 0000
0000h to 0000 0FFFh, which is the bottom 4KB of I/O space. Write these registers with their
appropriate values before setting either the I/O enable bit or the master enable bit in the command
register in configuration space.
3.2.2
ISA MODE
PI7C8154B supports ISA mode by providing an ISA enable bit in the bridge control register in
configuration space. ISA mode modifies the response of PI7C8154B inside the I/O address range in
order to support mapping of I/O space in the presence of an ISA bus in the system. This bit only
affects the response of PI7C8154B when the transaction falls inside the address range defined by
the I/O base and limit address registers, and only when this address also falls inside the first 64KB
of I/O space (address bits [31:16] are 0000h).
When the ISA enable bit is set, PI7C8154B does not forward downstream any I/O transactions
addressing the top 768 bytes of each aligned 1KB block. Only those transactions addressing the
bottom 256 bytes of an aligned 1KB block inside the base and limit I/O address range are
forwarded downstream. Transactions above the 64KB I/O address boundary are forwarded as
defined by the address range defined by the I/O base and limit registers.
相关PDF资料 |
PDF描述 |
|---|---|
| ADM1025AARQ | IC MONITOR SYS/VOLT 5CH 16QSOP |
| ADUC832BCPZ | IC MCU 62K FLASH ADC/DAC 56LFCSP |
| 31-10 | BNC FRONT MOUNT RECEPT |
| D38999/20JD97SN | CONN RCPT 12POS WALL MNT W/SCKT |
| ADUC848BSZ62-5 | IC FLASH MCU W/16BIT ADC 52MQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PI7C8154BNAE-80 | 功能描述:外围驱动器与原件 - PCI 64B/66MHz 2 Port PCI Bridge RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray |
| PI7C8154BNAI | 制造商:Pericom Semiconductor Corporation 功能描述: |
| PI7C8154BNAIE | 功能描述:外围驱动器与原件 - PCI 64B/66MHz 2 Port PCI Bridge RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray |
| PI7C8154EVB | 功能描述:界面开发工具 64B/66MHz 2 Port PCI Bridge Eval Brd RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| PI7C8154NA-33 | 制造商:PERICOM 功能描述: |
发布紧急采购，3分钟左右您将得到回复。