ii
Copyright 1999, 2000 ARM Limited. All rights reserved.
ARM DDI 0144B
ARM940T (Rev 2)
Technical Reference Manual
Copyright 1999, 2000 ARM Limited. All rights reserved.
Release Information
Proprietary Notice
Words and logos marked with
or
are registered trademarks or trademarks owned by ARM Limited, except
as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may be the
trademarks of their respective owners.
Neither the whole nor any part of the information contained in, or the product described in, this document
may be adapted or reproduced in any material form except with the prior written permission of the copyright
holder.
The product described in this document is subject to continuous developments and improvements. All
particulars of the product and its use contained in this document are given by ARM in good faith. However,
all warranties implied or expressed, including but not limited to implied warranties of merchantability, or
fitness for purpose, are excluded.
This document is intended only to assist the reader in the use of the product. ARM Limited shall not be liable
for any loss or damage arising from the use of any information in this document, or any error or omission in
such information, or any incorrect use of the product.
Figure C-2 on page C-4 reprinted with permission IEEE Std 1149.1-1990, IEEE Standard Test Access Port
and Boundary-Scan Architecture Copyright 2000, by IEEE. The IEEE disclaims any responsibility or
liability resulting from the placement and use in the described manner.
Confidentiality Status
This document is Open Access. This document has no restriction on distribution.
Product Status
The information in this document is final (information on a developed product).
Web Address
http://www.arm.com
Change history
Date
Issue
Change
12th February 1999
A
First release.
22nd November 2000
B
Second release.