参数资料
型号: IPR-SDRAM/DDR2
厂商: Altera
文件页数: 65/106页
文件大小: 0K
描述: IP DDR2 SDRAM CONTROLLER RENEW
标准包装: 1
系列: *
类型: MegaCore
功能: DDR2 SDRAM 控制器
许可证: 续用许可证
Chapter 3: Functional Description
Interfaces & Signals
Table 3–7. System Signals (Part 2 of 2)
3–29
Signal Name
write_clk
dqs_ref_clk
fedback_clock_out
stratix_dll_control
Direction
Input
Output
Output
Output
Description
Shifted clock that center aligns write data to the memory.
Stratix DLL reference clock output.
Fed-back clock output.
Disables the Stratix DLL reference clock during reads.
Note to Table 3–7 :
(1) This signal only exists on the custom variation when a dedicated clock phase is required, otherwise the connection is made inside the custom
variation.
Figure 3–19. Circuit for resynch_clk_edge_select
Capture
Register
Resynchronization
Register
Extra
Resynchronization
M u ltiplex
Pipeline
Register
local_rdata
Register
Table 3–8 shows the DDR and DDR2 SDRAM controller local interface signals.
Table 3–8. Local Interface Signals (Part 1 of 2)
Signal Name
local_addr[]
local_be[]
local_burstbegin
local_read_req
local_refresh_req
Direction
Input
Input
Input
Input
Input
Description
Memory address at which the burst should start. The width of this bus is sized
using the following equation:
For one chip select:
width = bank bits + row bits + column bits – 1
For multiple chip selects:
width = chip bits + bank bits + row bits + column bits – 1
The least significant bit (LSB) of the column address on the memory side is
ignored, because the local data width is twice that of the memory data bus
width.
The order of the address bits is set in the clear text part of the MegaCore
function ( auk_ddr_sdram.vhd ). The order is chips, bank, row, column, but
you can change it if required.
Byte enable signal, which you use to mask off individual bytes during writes.
Avalon-MM burst begin strobe, which indicates the beginning of an Avalon-
MM burst. This signal is only available when the local interface is an Avalon-
MM interface and the memory burst length is greater than 2.
Read request signal.
User controlled refresh request. If User Controlled Refresh is turned on,
local_refresh_req becomes available and you are responsible for
issuing sufficient refresh requests to meet the memory requirements. This
option allows complete control over when refreshes are issued to the memory
including ganging together multiple refresh commands. Refresh requests take
priority over read and write requests unless they are already being processed.
? March 2009
Altera Corporation
相关PDF资料
PDF描述
GEM31DTBN-S189 CONN EDGECARD 62POS R/A .156 SLD
GEM31DTBH-S189 CONN EDGECARD 62POS R/A .156 SLD
GEM31DTBD-S189 CONN EDGECARD 62POS R/A .156 SLD
GEM31DTAN-S189 CONN EDGECARD 62POS R/A .156 SLD
10YXJ2200M10X20 CAP ALUM 2200UF 10V 20% RADIAL
相关代理商/技术参数
参数描述
IP-RSENC 功能描述:开发软件 Reed-Solomon Encoder MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SLITE2 功能描述:开发软件 SerialLite II MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SRAM/QDRII 功能描述:开发软件 QDRII SRAM Control MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-SSIP 功能描述:开发软件 Crypto Bundle BU Solution RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-TRIETHERNET 功能描述:开发软件 Triple Speed Ethernt MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors