参数资料
型号: M-ORSO82G51BM680-DB
厂商: LATTICE SEMICONDUCTOR CORP
元件分类: FPGA
英文描述: FPGA, 1296 CLBS, 333000 GATES, PBGA680
封装: PLASTIC, FBGA-680
文件页数: 57/123页
文件大小: 2207K
代理商: M-ORSO82G51BM680-DB
Lattice Semiconductor
ORCA ORSO82G5 Data Sheet
39
the common clock. The input to the FIFO consists of 32-bit data and a frame pulse that indicates the start of a
frame (or A1A2 framing bytes). This frame pulse is used to synchronize multiple channels within an alignment
group.
If a channel is not in any alignment group, the FIFO control logic will set the FIFO-write-address to the beginning of
the FIFO, and will set the FIFO-read-address to the middle of the FIFO at the rst assertion of frame pulse after
reset or after the resync command.
The RX_FIFO_MIN register bits can be used to control the threshold for minimum unused buffer space in the align-
ment FIFOs between read and write pointers before OVFL status is agged. The synchronization algorithm con-
sists of a down counter which starts to count down by 1 from its initial value of 18 (decimal) when a frame pulse
from any channel within an alignment group has been received. The OOS alarm indicates the FIFO is out-of sync
and the channel skew exceeds that which can be handled by the FIFO. Once the frame pulse for all channels within
the alignment group have been received, the count is decremented by 2 until 0 is reached. Data are then read from
the FIFOs and output to the SPE generator before being sent to the FPGA.
For every alignment group, there is an OVFL and OOS status register bit. The OOS bit is agged when the down
counter in the synchronization algorithm has reached a value of 0 and frame pulse from all channels within an
alignment group have not been received. The OVFL bit is agged when the read address at the time of receiving a
frame pulse, is less than the minimum threshold set by RX_FIFO_MIN. In the memory map section OOS is referred
to as SYNC[2,4]_[A1,A2,B1,B2]_OOS, SYNC8_OOS. OVFL is referred to as SYNC[2,4]_[A1,A2,B1,B2]_OVFL,
SYNC8_OVFL.
Receive Clocking for Multi-channel Alignment
There are a total of nine clocks for the receive path, from FPGA to the core. The four used in SONET mode are
RSYSCLKA1 and RSYSCLKA2 (both for quad A), and RSYSCLKB1 and RSYSCLKB2 (both for quad B). The fol-
lowing diagrams show the recommended clock distribution approaches for SONET mode multi-channel alignment
modes. Cell mode alignment is discussed in the section describing the Input Port Controller (IPC).)
相关PDF资料
PDF描述
M-ORSO82G52BM680-DB FPGA, 1296 CLBS, 333000 GATES, PBGA680
M-ORT82G51BM680-DB FPGA, 1296 CLBS, 333000 GATES, PBGA680
M-ORT82G52BM680-DB FPGA, 1296 CLBS, 333000 GATES, PBGA680
M.PI-1R1D12 1 ELEMENT, 1.1 uH, GENERAL PURPOSE INDUCTOR, SMD
M01-014-1452PA 14 CONTACT(S), MALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER
相关代理商/技术参数
参数描述
MORTAR-44LB 制造商:3M Electronic Products Division 功能描述:3M(TM) FIRE BARRIER MORTAR, 44 98040056073 制造商:3M Electronic Products Division 功能描述:Fire Barrier 44 lb Bag
MO-RX3930 制造商:未知厂家 制造商全称:未知厂家 功能描述:FSK RECEIVER MODULE
MO-RX3930-FS 制造商:未知厂家 制造商全称:未知厂家 功能描述:FSK RECEIVER MODULE
MO-RX3930-FS315M 制造商:未知厂家 制造商全称:未知厂家 功能描述:FSK RECEIVER MODULE
MO-RX3930-FS434M 制造商:未知厂家 制造商全称:未知厂家 功能描述:FSK RECEIVER MODULE