参数资料
型号: IP-POSPHY4
厂商: Altera
文件页数: 57/144页
文件大小: 0K
描述: IP POS-PHY L4
标准包装: 1
系列: *
类型: MegaCore
功能: POS-PHY 4 级接口,链路层/物理层
许可证: 初始许可证
Chapter 4: Functional Description—Receiver
4–17
Error Flagging and Handling
After the optional channel aligner, the training pattern is treated as IDLE s and
discarded. The training pattern has no internal function because the data entering the
MegaCore function is already byte aligned.
A status flag, stat_rd_tp_flag , is also provided. This flag pulses high for one clock
cycle at the end of the training pattern to indicate that a correct training pattern has
been detected. This flag pulses once for every occurrence of 10 (repeated) training
control words followed by 10 (repeated) training data words. This flag does not
indicate that the data path has been deskewed.
DIP-4 Marking
The receiver MegaCore function supports three different ways of handling DIP-4
errors. In the first mode, the none mode, the err_rd_dip4 signal is asserted but no
packets are marked as errored. You should use a higher level CRC or FCS to detect
packets with errors. In the second mode, the optimistic mode, the MegaCore function
only marks packets that have a high probability of having errors. In the third mode,
the pessimistic mode, the MegaCore function assumes the worst case and marks any
packet that may have errors. In all modes, if the MegaCore function detects a DIP-4
error, it asserts the err_rd_dip4 signal.
The optimistic and pessimistic modes are discussed further in these sub-sections,
where an open packet is a packet for which a SOP but not an EOP has been received
when the error was detected.
Optimistic Mode
This mode attempts to error individual bursts as opposed to entire packets. Any data
burst incoming on the SPI-4.2 interface is marked with an Atlantic error if its starting
payload control word contains a DIP-4 error, or its terminating control word contains
a DIP-4 error.
If the starting payload control word contains a DIP-4 error, the aN_arxerr signal is
asserted for as long as the burst is present on the Atlantic interface. If the terminating
control word contains a DIP-4 error, the aN_arxerr signal is asserted on the last
Atlantic data cycle of the burst.
The MegaCore function does not keep track of open packets containing errors that
have not been terminated with an EOP. The Atlantic error signal is not held until EOP
and it is up to the user logic to ensure that errors are carried across continued packets
if required.
1
1
In cases where the terminating control word contains an EOP, the associated
aN_arxmty value is not rounded down to the nearest even value.
Pessimistic Mode
In the event of a DIP-4 error, all open packets are marked. All subsequent data for
each port is marked until a new SOP for that port is received.
Because of the logic required to track open packets per ports, this feature uses a large
amount of logic for systems with many ports.
May 2013
Altera Corporation
POS-PHY Level 4 MegaCore Function User Guide
相关PDF资料
PDF描述
IP-RIOPHY IP RAPID I/O
IP-RLDRAMII IP RLDRAM II CONTROLLER
IP-RSDEC IP REED-SOLOMON DECODER
IP-SDI IP VIDEO INTERFACE - SDI
IP-SDRAM/DDR2 IP DDR2 SDRAM CONTROLLER
相关代理商/技术参数
参数描述
IPPS054193X 功能描述:保险丝 800A 1000V 3GKN/75 RoHS:否 制造商:Littelfuse 产品:Surface Mount Fuses 电流额定值:0.5 A 电压额定值:600 V 保险丝类型:Fast Acting 保险丝大小/组:Nano 尺寸:12.1 mm L x 4.5 mm W 安装风格: 端接类型:SMD/SMT 系列:485
IP-QDRII/UNI 功能描述:开发软件 QDRII SRAM Control MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-100GEMAC 功能描述:开发软件 100G Ethernet Mac MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-100GEMACPHY 功能描述:开发软件 100 Gb Ethernet MAC PHY MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPR-100GEPHY 功能描述:开发软件 100G Ethernet Phy MegaCore RENEWAL RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors